« I got another HSTi Wireless Media StickHome server migration ran into some cacti »

Took a diversion from cacti and now its nagios

04/28/13

  10:06:00 pm, by The Dreamer   , 989 words  
Categories: Hardware, Software, Computer, Ubuntu, FreeBSD, CFEngine

Took a diversion from cacti and now its nagios

So, doing cacti on cbox doesn't seem to be working long term... but, the moment is being prepared for....I starting to assemble the pieces to build a new machine to do this and handle some other tasks that I've been looking for a place for.

Back to cfengine, I added a promise for dnetc (distributed.net)....and then a promise to finally configure CUPS on the two servers. And, then I turned to nagios.

I spent a couple evenings creating the initial configuration of nagios, working in design changes that I wanted to make and initial monitoring of localhost (dbox). Though it wasn't straight forward....there were differences here and there....mostly in FreeBSD layout, paths, and some of the commands taking different options. But, eventually I got everything running. My old check_dyndns worked once, but then stopped working.... problem was that it did 'stat -c "%Y" ..." which doesn't work on FreeBSD, 'stat -f "%m" ...' was the adjustment for that. All, while all the checks_* seem to be there, command definitions was lacking....but I guess having command definitions for everything is part of the debian/ubuntu packaging. There were other frills that came with that, that I don't mind not having...

I did run into check_ntp being deprecated....with check_ntp_time and check_ntp_peer being the tests to use....separating and making more clear on whether you're comparing time between servers using ntp or checking the state of the ntp server...
It did show some interesting oddities in holding NTP time on my home network.... I know that I should have 3 or more ntp servers, but it seems that I'm often landing in the state where I only have 2....with lots of delay, resulting in pretty good swings of jitter....almost makes me wonder if this something I could graph in cacti.... :hmm:

Wonder if I can find a cheap NTP appliance somewhere....

The last stumbling block was check_dhcp. Which seems to be broken on FreeBSD. All, the discussion on it seemed to point to firewalls, but no firewalls and it still didn't work....tcpdump on both places, and its saying it sending stuff, but no packets appearing on the network. But, I can see the other DHCP traffic on the network.

I remove that check and call it a night. I mull some possible work arounds....first one I tried was setting up linux compability and try running the check_dhcp from my working (ubuntu) nagios. Well, it didn't work...it couldn't find an interface. Oh well, guess there's the ugly way....use nrpe to invoke it. Though that didn't work right away.....probably because while I had created new nrpe configs for all my servers in cfengine, I haven't put any of my ubuntu servers under cfengine yet. Most of the other promises haven't been implemented for ubuntu yet. It was pretty simple to include nrpe.cfg for everything.... in fact it condensed to only 3 files.... a freebsd version, an ubuntu version and a host specific version for orac. Well, not right away...that happened more recently...while I was going through and updating the nrpe.cfg's by hand on the ubuntu servers. Was when I noticed that some of the files were only different in comments....so I made further simplifications in cfengine...which'll propagate out eventually....

Long term, I'll probably just have to track down some alternate implementation of check_dhcp....

I then add cbox to monitoring...and then looked to see about monitoring things that are on cbox/dbox...so I found checks for freeradius, cups, squid, along with improvements to checks on ntp. The check_squid was tricky....I got it working by hand, after making the suggested change for the default Cache type parsing, which turned out to be changes for squid3 vs. squid2 (but box is still running squid 2.7 - since I had re-built it by hand with SSL support, and blocked ubuntu from updating it. Orac wasn't blocked so it eventually turned into squid3.

it worked by hand, but wouldn't work under nagios...turned out that the embedded perl wasn't liking it. I was going to disable embedded perl for it, when I took a look at seeing what it was complaining about. And, did some reading on embedded perl.... the gist was "use strict", "perl -w" and "perl -c" as starting points. perl -w was find, but perl -c had one problem....which I fixed. But, no go. And, then noticed the line "# todo : use strict", guess I'll have to deal with that.

And, making that all happy, got it working.

The only other quirk was the memory check wouldn't work on FreeBSD, I guess there's no mallinfo() available for that. So, no running that test on those servers....plus no Cache test on box. But, it still left enough variety of tests that worked on all. And, it wasn't so much that I wanted to get all the information, but I choose to define all the different tests with ports set into the test....so running the check would also test that all my squid ports worked. There's actually only two that matter, but I have all my squid's configured the same, listening on 5 or 7 ports....depending on whether I have SSL enabled. Though I pretty much only need two now. I'm not doing transparent proxying and I don't need the SSL now that I've split box into dbox/cbox....the SSL was so ddclient could work on box and update dyndns via proxy to DSL....

Next up is adding zen to nagios, and coming with with more tests of things that are specific to zen, but covered or not covered in the old nagios.

Though as I worked along...there were things I couldn't find monitors for...though I realized that I could have cfengine promise that those services were running. Plus cfengine was also taking care of other things. So, I should probably work on writing some promises for zen. So, I can have promises to make sure things are started up again after a port is updated or that php/extensions.ini is reordered, etc.

But, I'll probably continue adding everything else to nagios first.

No feedback yet

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 20 years 2 months 1 day 7 hours 43 minutes and 34 seconds until the end of time.
And, it has been 4 years 10 months 27 days 6 hours 19 minutes and 22 seconds since The Doctor saved us all from the end of the World!

Search

November 2017
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
    1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30      
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 2
This seal is issued to lawrencechen.net by StopTheHacker Inc.
blogtool

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime