« Updating my Eyeglass Prescription ProgressionUpgrade to 5.1.2 »

Replacing Batteries in my first PowerSource 400 ... then second and more.

10/23/14

  09:11:00 pm, by The Dreamer   , 2054 words  
Categories: Stuff, Computer, Networking, Home, Healthcare, Printers

Replacing Batteries in my first PowerSource 400 ... then second and more.

Back on November 25h, 2013: I started writing this post:

According to this blog, I received this PowerSource 400 on January 21st, 2008 - click here

In answer to the question at the end of that post, the answer was yes. There are 5 other PowerSource 400's in service in my home.

Anyways...back on October 28th (my 45th birthday &#59;D ), about an hour after getting into bed there was a power blink....I recall being woken by the PowerSource 400 in the bedroom, but I was still able to breath, so I eventually went back to sleep. I woke in the morning to find that half my network had been down for quite some time, though I didn't see any alerts on the security system control pad.

This being the "network closet" UPS...it was providing backup power for my DSL modem, its associated router, the switch that connects the various rooms in my home together, namely the "living room" and the "back bedroom". Not sure which AP the "side bedroom" was connected to. Though the power outage knocked out my laser printer, which I haven't felt the urge to find out why. Really need to work on finding a more accessible location for it, or work on reversing the entropy in my nuclear room(s)... especially since my other printer is circling the drain, and not sure when I'll get around to getting the new inkjet printer that I've been eyeing.

Restarting the UPS, was when I finally got alerts from my security system. It was a combination of events that happened when I cycled power and events that had been waiting for the return of connectivity. The security system's primary connection is broadband, but it also has a phone line for backup (there's a cellular option, but its been out of stock whenever I've felt the urge to splurge for it....though I kind of have cellular backup anyways....)

It was the return of power that caused it to report loss and recovery of the phone line, along with the queued messages of broadband and power outages, with restores of all... Its built in backup battery had kept it up during the outage (approx 8.5 hours). The phone line from the base station is connected to an ObiHai OBi110. Which has an FXO port to allow selection of analog phone service, or in the event an outage pass through to this. In normal operation the OBi110 is making my Google Voice available to my regular phones, where the OBI110 is configured to use my other Internet gateway. The FXO port is connected to a Cobra PhoneLynx Bluetooth Cell to Home Phone Adapter which is associated with a phone with AT&T prepaid service.

Though I plan to at a later date replace both the OBi110 and PhoneLynx and cellphone with an At&t Wireless Home Phone Base. Which I have sitting, waiting for when I get around to it.

The plan is the OBi110 will move to the living room for use there, though its in associating with the planned inkjet printer replacement.

So, its time to replace the batteries...guess I'll do research on where I can get a pair. Hmmm, it uses the same kind as the pair I had replaced in my SmartUPS 1400 back on October 10th (it went around October 5th, and I ordered them on the 6th). The site provides discounts if you buy multiples. I got 5% off for getting 2, would've gotten 7% off for getting 4, or 8% off for getting 6 (9% for 8 and 10% for 10+).

I hesitate, since I'm waiting to see how the recent problem with BillMeLater goes...so needs to be sometime after Nov 5th to order. Meanwhile a storm comes in on November 3rd, and power is blinking like crazy...and I'm constantly restarting the PowerSource 400. Finally I take it out of service, and everything is just in a regular surge strip. Things remain stable (dbox stayed up straight) until this morning. But, feel that I need to put the PowerSource 400 back into service before my annual Thanksgiving trip.

After much procrastination, and lots of searching. I settle on ordering 4 such batteries from an eBay seller on November 14th. Plan to replace the batteries in my second PowerSource 400 soon, since it was purchased on December 31st, 2008 and provides backup power for my CPAP. (see here).

And finally, this morning, I decided that I've put it off too long and to replace it this morning.

Which was a challenge....

There was supposed to be a page 3, but all I had typed was the page break...so had to figure out how to open it up again. Aside from the 4 corner screws, I remembered that there's a screw behind the sticker in the middle. But, I forgot the rivets in the bottom, and that both parts need to be extracted.

Once opened, I started to disconnect the batteries, and once again threw sparks and added another mark to my screwdriver. Taking a step back, I decided there's an order of operation involved here. The answer is start with the outside connections, and then the inside ones. And, then reverse it. This time I knew the side panels interlock with the batteries to help lock them into place, so made sure the wires were clear, I noted that the neural wire for the front outlet had a kink, I made sure that all the wires were in the channel while buttoning things back up.

Surrounding this, was the challenge of getting it out from behind my headboard, though while I was down there, I found a couple missing packages of mask diffusers, I knew I wasn't using them up that quickly, but couldn't figure out why I kept running out. There was one Xyrem pill bottle, I had one night knocked both down...luckily while the empty (first dose) one went all the way down, the other was just wedged between mattress and headboard in upright position. Since I use bottles longer than a month, I usually go by how grungy the caps get...since I customize the bottles, so I can tell the two apart by touch, which matters when one has a larger dose than the other....and the caps get grunge depending on how many nights I overfill (have always had a problem measuring drinks that way.... :> ) Or how often they get tipped...

There were also as expected a bunch of nasal inhalers of various types...such as ones from: Olbas, Benzedrex, and Vicks.

Pages: 1·

No feedback yet

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 20 years 5 months 25 days 23 hours 41 minutes and 38 seconds until the end of time.
And, it has been 4 years 7 months 2 days 14 hours 21 minutes and 18 seconds since The Doctor saved us all from the end of the World!

Search

July 2017
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31            
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 1
This seal is issued to lawrencechen.net by StopTheHacker Inc.
powered by b2evolution

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime