Tags: backuppc

Pages: 2

03/28/11

  01:43:48 pm, by The Dreamer   , 837 words  
Categories: Hardware, Computer, Storage

Worked on Orac yesterday

Yesterday, I decided that I should poke around Orac in preparation for building that new 5x2TB RAID5 array. My backuppc pool keeps filling up, and deleting old backups isn't freeing up enough space anymore (5x1.5TB RAID6 array.)

At first it was just going to be a simple procedure to add two eSata cables from the computer to the Sans Digital MS2T+B, and then shutdown and move the two 1TB drives in RAID 1 from the bottoms slots of my TR5M-B (upper 3 are unoccupied). But, as I was pushing on the cables the bracket popped in...so I had to open the case to put it back in place.

While I was in, I decided to see what kind of fan is on the drive cage. A couple of weeks earlier, I had gotten a SMART alert of high temperature and cacti showed that there was a rise for a few hours in the late evening. It had been warm that day, warm enough that I touched the AC briefly in the earlier part of the evening. Guess I needed it to stay on the rest of the evening.... But, there was no fan...though there were mount holes for a fan, and there's supposed to be a fan connector on the motherboard for it. Though not all models had one, so evidently not the GT5635E. Though wonder if I should, maybe the addition of the second internal drive makes it desirable (so far I've had to replace the second drive twice....the current one is now a newer generation than the original drives, and runs cooler.)

Since there wasn't a fan, I didn't take the cage out....so I didn't measure what size fan might go in the spot. Though I have a rough guess as what size it is, so perhaps later on I'll pick up a fan to put there. I should probably see about a new rear fan....perhaps a faster one might help.

But, I put things back together and moved the drives, started things back up.

Of course, the first problem is now all my drive letters are different....which messed things up like cacti (hddtemp recording), gkrellm and rc.local (where I changed the i/o schedule for the RAID6 array drives to noop). There was also the complication that the filesystem on the drives I just moved hadn't been fsck'd in over 6 months. So, it needed to fsck them. root also needed be fsck'd. It took a long time to boot, but eventually did. Though the filesystem on the moved RAID1 array hadn't finished checking...had set 'nobootwait' on filesystem. I'll probably remove those now...since they have fixed Bug #563916. But, after fixing rc.local (and before fixing cacti) I rebooted....so it still needed to do the fsck.

Later I still had to reboot again, because two services that reference the filesystem....weren't happy...well, one was really unhappy and the other wasn't reporting valid information for it and needed a restart to make it work (I couldn't probably have fixed the issue without a reboot, but I wanted to make sure it rebooted right after another change I had made. There's still something odd going on, affecting a different RAID1 array....will look into that later (or I could opt to move the filesystem to the RAID6 array)....since it could use a grow.

Full story »

03/15/11

  02:48:37 pm, by The Dreamer   , 1358 words  
Categories: General, Home Theatre, Software, Furnishings, Storage, Healthcare, Roku XDS, Boxee

Today is supposed to be Roku day

And, it will be....but first I decided that I should get at the clutter of new stuff that I hadn't gotten around to yet.

First up was a Sans Digital MS2T+B MobileSTOR enclosure I had picked up a while back. The current array that backuppc goes to on orac is filling up. It's just a 4TB filesystem on a RAID6 array using 1.5TB drives. There's one other filesystem on this array and it could use some more room as well. I have debated whether the array needs to be RAID6 for backuppc, or whether RAID5 would be sufficient. But its the other filesystem that is driving RAID6, though I wonder if RAID 0+1 might be better for that (or just RAID1, since it is currently small enough). But, I'm using a pair of 5 bay PM enclosures....and older RAID 1 in one, and the RAID6 array in the other.

So, I've decided that I'll likely look at getting 5 2TB drives and doing RAID5 for a backuppc only array....keep the current 5 1.5TB drives in RAID6 for the other filesystem and whatever else I might want to move over to it. But, the stuff on the current 1TB RAID 1 array should just stay put. Well, there are two (of 4) regular eSATA ports on the back of orac that aren't being used yet. So, that's where the 1TB RAID 1 array will go.

It is still a ways off before I take the plunge and actually build the new array (though the backuppc filesystem has filled up twice since I thought up this scheme)... though prices are dropping and I do have a tax refund coming that many other things I want to use it on (including a travel/backup cpap setup, which is about the entire refund...oops).

But, I decided I would set it up, because I saw 2TB Hitachi drives the other day for cheap (they did recently get acquired by Western Digital, so sellers might be clearing out the Hitachi branded drives?) So, it might fall into range of what would be an acceptable single month discretionary purchase. Though technically, I've already done this month's when I bought the Nanosat speaker package that was a NewEgg shell shocker....though I used BillMeLater. I've been wanting to get this set to upgrade the odd ball collection of old speakers that is my current setup. But, the shellshocker price put it just into the range.... But, I was considering Seagate drives...which then dropped to remain cheaper than Hitachi....Hmm....

Anyways...I went to put the new enclosure into service, but I couldn't find the pair of eSATA cables I thought I had set aside for this. I did buy a pair of eSATA cables last fall from Amazon.com. But, evidently I used them for something else. I'd guess when I moved orac, I needed the length...not sure where the old cables went to then, but the probably aren't long enough for this. So, did some quick eBay purchases...and maybe I'll get to this eventually....

Pages: 1· 2· 3· 4

12/30/10

  10:06:48 am, by The Dreamer   , 891 words  
Categories: Digital Photography, Hardware, Software, Computer, Networking, TV, Storage, Healthcare

December 30th Migration Update

Again, last night I didn't do as much work on migration as I hoped, between feeling some what really sleepy...which passed after a little sit on sofa where I had to go back to the beginning of the show I was watch to find out where I really was at....and watching the two part Christmas themed episodes of "The Closer".

The goal I had set out was to finally install my ScanSnap S300 and maybe EncoreViewer (which I had heard wouldn't work, but I had to see for myself). I also did some other things like install and move Eye-Fi, checked that I could manage the cards using the built-in SD card slot (doesn't work on my laptop, but it worked here). EncoreViewer wouldn't work...people had said it wouldn't work on 64-bit Windows 7, though reports are that the 2.0 version will...but don't need it yet, so don't feel like buying it. I'll probably see about getting XP Mode and see if that makes it work, otherwise there's VirtualBox...which I know works. I think I have one unopened copy of XP left.

I did some poking around on TARDIS last night, first it was move the LabelWriter 320 to there for eventual reconnection. Later it was to put the SmartCard reader for EncoreViewer back on the computer. I decided to plug the LabelWriter back in and see if I could share it. It wasn't working...apparently it doesn't like being connected to the USB hub. It used to be on a USB hub...though that's probably why it was the only thing that was still plugged into the old USB 1.1 hub. I didn't keep it when I moved TARDIS...

Seems the 6 USB ports on the back of the computer is a really limited quantity, with all the things that won't run on hubs. :## A bigger problem on the new computer, because the keyboard and mouse each take up one of the precious ports. I'm using one for the direct connection of my UPS, another will be for the external drive for local backup, one is the USB hub....that leaves one left, and that'll probable be the webcam.

The 7-port USB hub is filling up too, though not as fast since the LabelWriter320 isn't supported on Windows 7. So far its LabelWriter 400, SnapScan S300 and the USB to serial adapter (I mentioned yesterday). Maybe I'll replace the hub with one with more ports....chaining this hub so to the otherside of my desk...

During the LabelWriter 320 on TARDIS process, I had to reboot. So, I decided to disable a bunch of things that start up when it boots that didn't need to be there anymore. Mainly the stuff for ScanSnap and the many IM clients. And, with the IM clients stopped, I started working on installing and configuring some of the IM clients on Zen. I should get to getting the webcam working soon.

Installed some other stuff like Tweetdeck, Picasa...then decided that I should work on the backup drive.

I populated my old Sans Digital TR2UT-B with a pair of Seagate 1.5TB drives, one that I had on hand plus the one I received today via Amazon Prime. Had to remember how to get it to make a mirror, and then it went about its business. Wonder where the CD for it went to, and whether the monitoring software would work on Windows 7.

Now, I had commented how quiet the living room had become when I moved TARDIS out. It stayed quiet with Zen setup. This HP is much quieter...even when it has BOINC hammering it. But, the quiet has ended, because the fan in the Sans Digital TR2UT is quite noisy. At first I was going to put it near the computer on it or on my desk, but I switched to putting it down lower as far as the cable would let me. on nearby bookcase....same shelf where I used to have external drives for much the same purpose in the past...

After I had gotten the drive formatted, it detected the addition and asked what I wanted to use it for. So, went into using it for backup. It already takes a while to do a backup...also less free space on it than system drive....wonder if I shouldn't have gone with the 2TB external instead now.

Then I thought I should see about getting backuppc going, but left the things for the night to let the backup complete (and the raid1 build to finish).

Pages: 1· 2

10/30/10

  08:56:22 pm, by The Dreamer   , 445 words  
Categories: Hardware, Software, Computer, Storage

I moved orac today

Its time that the full backups have been taking place on orac's backuppc. And, my /var/lib/backuppc doesn't quite have enough free space for a full of some of the jobs (I guess it doesn't matter if many, if not all, of the files would already be in the pool, it still needs more free space than I have in the filesystem to do the job).

So, I was looking at what I could about moving some stuff around so that I can grow /var/lib/backuppc by more some more....to perhaps 3.5TB. And, I thought about why it was that orac was located where it was. Basically it was just an open spot near the monitor.... And, it really needed to move somewhere, where I could better park the external drive cases. Currently the main one was a Rosewill RSV-S5...there's a Sans Digital TR2UT-B, but I had recently picked up a Sans Digital TR5M-B that I needs a place where I can park it near orac.... Along with the two old 500GB My DVR Expanders.

So, the plan was to move it next to lhaven, though I ended up moving lhaven into the spot opened up by orac. orac has side vents so it couldn't go exactly where lhaven was, but decided to move lhaven out of the way so that I could get in and cable up orac.

Before turning orac back on...I did the storage changes. I setup the Sans Digital TR5M-B, its smaller than the Rosewill RSV-S5....moved the 2 1TB drives from the Sans Digital TR2UT-B over to it, and hooked up the 2 old 500G MyDVR Expanders to the regular eSATA ports on the back of orac (the system has 6 SATA ports internally, and I had gotten 4 port SATA back to run 4 of the ports out for future upgrades....that was before I got the 2 port PM eSATA adapter for the PCIe x1 slot.)

Also discovered that the bays number the other way around in the TR5M.

Now with orac up again, I was kind of expecting the drives to be in different places...but they were all in the same place. And, 500G MyDVR Expanders in sequence after the two internal drives.

Quick look around, and then immediately went about turning the MyDVR Expanders into a RAID 1 set and a single ext4 filesystem. And, then I started moving files over to it. Of course, that slows down the build of the RAID....

But, now to wait until I decide how to move the other pieces around....

Wonder how long before I amass the 5 2TB drives to build the new RAID5 to move the current /var/lib/backuppc over to.... (keeping the current 5 1.5TB RAID6 for more important data).

06/21/10

  05:57:00 pm, by The Dreamer   , 1339 words  
Categories: Software, Computer, Storage, Ubuntu

declaring 'orac' alive again.

'orac' is back, long live 'orac'.

'orac' had gone away on Thursday, it actually started in Wednesday.... For some unknown reason, I decided to start the upgrade of 'orac' from 8.04LTS to 10.04LTS.

The upgrade seemed to go okay, but when I rebooted....it wouldn't boot. I scrambled around looking for a livecd to boot with....did have any 64bit ones handy and 10.04 was hit and miss on booting. But, I could see vg0 (root, home, swap) with all the livecds except 10.04.

Something about 10.04 didn't like how vg0 was set up. I looked at 'box', which had been running 10.04 for a while and was working. Noticed the main difference between the all the other md's and vg's...was that they weren't fdisk'd md's. When I had originally set up 'orac', I had used a recipe that I had found online on how to do it...since initial install of ubuntu onto Raid wasn't straight forward then. and after md1 was created, I had fdisk'd and then pvcreate/vgcreate, etc. on it.

When I added the other two raid sets....I just pvcreated the md and then used it...no fdisk of the md.

In retrospect I should probably have done a backup of the filesystems while I was running a livecd that could see it....and then perhaps remade the disk and restored into it. But, I didn't and while trying to 'fix' the problem...I corrupted things, and I wasn't able to recover (tried pvcreate -u + vgcfgrestore...but couldn't get the filesystems to come back.

After lots of other attempts and such, I reached the point where I decided things were lost and set on to figure out if I can get back.

backuppc localhost doesn't back up the entire localhost....but it had my home directory backed up (but not all of /home), and it was also backing up /etc. Realized the the one thing it wouldn't get is my crontab files. But I had a dd image of most of the disk (the front part munged)....so I string'd and recovered my crontab from it. And, then set out to install 10.04LTS new.

Since md1 was going to get redone, I decided to redo md0..../boot. Made it a bit bigger than before so that it won't get as crowded from accumulating every new kernel that is released until 12.04LTS comes out. Or some future release needed more than the old size to work. Had actually run into this problem years ago at my previous job....

But, the install kept failing....asking for the disk again....I burned several copies, download from other sources, but no go. So, I tried to 9.10 (thinking I would upgrade to 10.04 immediately), but it also didn't work. Eventually, I found a reference on google that said the 10.04 (and 9.10) installs were picky about what kind of optical drive was being used. It specifically mentioned a particular DVD burner, with 'orac' came with a DVD burner...though I have never used the drive since I did the original install. I tried a USB stick, but couldn't get the machine to use that, and the other external drive I could find was firewire (and there's no BIOS option to boot from firewire).

So, I took apart my machine and the firewire drive. And, put the DVD-ROM drive that was in the firewire enclosure into the machine. The DVD-ROM drive had original come from my circa 2003 Dell, known as 'tardis'.....when I had swapped in a DVD burner.

'box' is the Linux machine that I do cd burning on....and I hardly do DVDs anymore, though I did get a new DVD burner recently for the new 'gumby'.

Anyways....with the 'new' optical drive in 'orac'....I was able to get 10.04LTS to install, and then started the long process of getting my environment back. First problem was backuppc installed with a different uid/gid....so it wouldn't access the old /var/lib/backuppc storage. I opted to fix it the wrong way....that took forever....doing the chown of the files/directories. Should've just changed the uid/gid that backuppc had installed itself as. But, then I tried to do the restore....next problem was sudoers, had forgotten about that.

I then restored /etc to another place, and restored my home directory along side of the one the install had created. When done I swapped my home dir and rebooted. That was a mess. The desktop was all messed up...not just missing apps. Figured it was because the desktop didn't like the old settings....but couldn't find any details on how to upgrade desktop, if I hadn't done an upgrade. I thought other OSs handled this kind of thing. But, not here. So, I flipped back and slowly copied stuff over and restored settings etc. And, reinstalled various apps as I went.

Then I decided that I had made sufficient progress on getting 'orac' configured, that I didn't want to lose things. I had disabled backupc from doing automatic backups during the restore. So I turned it back on and back up the other systems around my home (after first doing a new backup of the new 'orac'). It didn't like .gvfs in my home directory....in old version it complained but continued, in this version it complained and the tar returned an error due to previous error...causing the rest of the backup to fail (the localhost backup does 4 'shares')....so I tweaked the config to get it to work.

The only thing I saw was that it tried to backup 'ulkc', my ubuntu notebook...but it wasn't on at the moment, so it failed. It wasn't going to automatically back up anything else yet, since its one of my blackout periods. So, I started kicking off manual backups of various things, and watched it work. First thing that didn't work was a backup of a windows share. Seems smbclient changed since 8.04LTS...and one of the options was used in backuppc 3.0 didn't work anymore. The new is 3.1, and the default options is minus that one switch....so I matched things up and it did its thing.

The only problem that still didn't work, which I think was the reason I decided to bite the bullet and upgrade to 10.04LTS (to get the newer backuppc) was incremental backup where a very large file has changed since the full. Usually the virtual harddrive of a VirtualBox. Sadly this wasn't fixed in 3.1. Guess I'll have to look at some other way to deal with it. Like exclude it from the regular policy and create a new one that only does that one file....or something. Or maybe ....

I continued to work on other things, as I worked through comparing the old /etc with the new 'orac' /etc. Though interrupted by trying to get file shares working (I had exported my Dropbox directory from another server for access from other computers on my home network....though LAN sync is available now, I haven't undone the stuff yet). And, getting snmpd working again....so I could see the impact to resources and network from all the backuppc jobs running in cacti.

One strange problem is that 'orac' can not access the NFS shares on 'lhaven' (RedHat 7.3), but 'box' can....the only difference I can think of is that 'box' was upgraded to 10.04LTS.... Though I guess it is time I worked on moving services off of 'lhaven' and figure out what I'm going to do to either replace or upgrade it.

The other issue was Handbrake. Originally, I had built it by hand...since there wasn't a package for 64-bit Linux. Though later, I got a newer version via PPA. But, the version that I got via PPA for Lucid didn't work. So, I eventually went and built my own again...from the subversion....my build works....

Hopefully, when 12.04LTS comes along....things'll just upgrade smoothly.

The other odd thing, is that 10.04LTS seems slower....particular in file I/O. The machine seems to really degrade in performance doing a large file copy (as was happening when I was copying directories from my old home dir to the new one.) All the CPUs are bored while this is happening (it's a 2.4GHz Core 2 Quad....with 8G of memory....) Hopefully something that'll resolve itself later?

05/26/10

  10:20:48 pm, by The Dreamer   , 845 words  
Categories: Hardware, Computer, Storage

Yay, I used backuppc to restore almost 400GB of data

So, yesterday...I finally decided to buy the new external firewire drive for 'gumby'. Originally the plan was so that I would have retrospect express backups of the system drive, that I could boot from its restore CD and get that part back....with backuppc protecting my data.

On that criteria...I was trying to decide if 500GB was sufficient or perhaps smaller. Since the system drive is 160GB. And, whether USB 2.0 would be sufficient or if I still needed firewire. Old 'gumby' only had USB 1.1 and Firewire 400 ports. New 'gumby' came with USB 2.0 ports and I had added a Firewire 400 card to it.

Looking at the computer store at the K-State Student Union and various online sites (such as NewEgg, Tigerdirect, eBay)....that there wasn't a whole lot of good options in the under $100 mark.

OTOH, I had suspicions that another one of the 300GB firewire drives connected to 'gumby' was failing. I thought maybe I'd get a bigger drive. Looking again at the selection at the K-State computer store, I found a few reasonable choices....1TB, USB2.0/Firewire 400...and one USB2.0/Firewire400/Firewire800/eSata...all under $150 ($125+) So, then I wondered if I should get the Firewire800 option. I knew it was unlikely that I would stick an eSata controller in 'gumby' But, I wondered if I could swap the Firewire 400 card for a Firewire 800. Turns out there's very little in the way of 32-bit PCI Firewire 800 cards out there. And, they weren't cheap....enough for me to jump on. So, I decided that I would just settle for one of the USB2.0/Firewire 400 external drives. Namely the cheapest one at $125....plus it was kind of a known quantity....I already had an older (physically larger) Iomega Ultramax 1TB USB2.0/Firewire drive connected to my other Windows XP box ('tardis')...doing just backups.

I hooked it up and tried to get it going....at first it would detect and then it caused other issues, crashing my computer. Eventually I got the wizard to show up so I could initialize it and reformat it from Mac format to NTFS. The crashing seemed to cause some strangeness with the rest of the system. At first I was cursing having put off re-establishing some kind of Restrospect Express backup on the new 'gumby' (lost the old when the first of external drives died on the old 'gumby' -- used to have Maxtor OneTouch ?? externals...), but then I remembered that I can get the configs / apps restored using backuppc. (Hmmm, wait...I should be able to fix my firefox settings using FEBE. OK)

Meanwhile...I didn't notice those minor app issues until this morning. But, what I started to do was copy data from both externals over to the new drive. At first I was going to come up with a new organization and a single drive letter...when I decided that I would do two partitions, so that they could go into the same original drive letters. And, the old drives would go somewhere else. That way I wouldn't need to reconfigure the apps that look for the data, and backuppc would continue to see things in the same place, etc.

And, the plan was to use the two old 300G drives as the store for local (Retrospect Express) backups.

I debated whether it would be faster to copy between firewire drives or restoring the data using backuppc (both computers have 1Gbit NICs...old 'gumby' only had 10/100). I ended up doing both...restore one drive/partition from backuppc and copying the other drive/partition locally.

As luck would have it....the drive I was copying locally then decided it was time to die. And, things came to a halt.

Piecing back together... ended up restoring both drives from backuppc onto the new 1TB drive.

Once finished, I changed drive letters again...and rebooted to make things work (Windows was hungup about write issues on the failed drive, so it wouldn't let me change drive letters without some force.)

Later I got Retrospect Express working...currently I reformatted both old 300GB drives and have it doing two sets of backups to the drives. I kind of expect that one of them is going to fail me at some point in the future....but it should buy me time until I get the next external drive for this computer.

Running an initial backup right now, and when done I'll create a new restore image....and I should get to burning it after I do the next set of upgrades on this computer.

Oh yeah, yesterday I also finally changed out the USB to PS/2 adapter on it....the old one was annoying because the mouse would stop working periodically....have to be really still for a while and then the mouse would work again. Annoying! New adapter I got is a Trendnet (same brand as my KVM)....so far it seems to be working better, at least in the mouse department. The keyboard has had some issues....stuck repeating 3's.

On tap for next set of upgrades (likely to take place sometime this long weekend), change out DVD-ROM drive for a DVD burner and upgrade the memory to 4GB (after upgrading 'orac' to 8GB and moving the 2GB from there to here).

05/15/10

  04:20:00 pm, by The Dreamer   , 1373 words  
Categories: Software, Computer, Storage, Ubuntu

5-bay RAID and backuppc

Ever since I learned about 5-bay port multiplier SATA enclosures, I've been wanting to get one to play with. And, when I acquired 'orac'...I sought out a port multiplier eSATA adapter to include in the build of the system. And, then waited for support of the adapter in ubuntu. Stopped on 8.04LTS and waited for inclusion in a kernel.

I took a step closer when I finally got the 2-bay enclosure to mirror a pair of drives I had impulsively purchased. Since it worked, I then then bought a 5-bay enclosure (it came up as a NewEgg ShellShocker).

But, after some thought, I decided that what I wanted to do was build a 5 disk RAID5 using 1.5TB drives....so it would get me at least 5TB of real storage. And, set that I would wait until 1.5TB drives were under $100.

In the meantime, I collected a bunch of old SATA drives to see what I trouble I could get into....it didn't last long, as one was definitely dead and two quickly failed. Of course, two of the had been kicked out of RAID1 setups previously, and the other was a failing drive that I replaced/upgraded. So, it was back to waiting.

Eventually, I got 3 Samsung 1.5TB drives through NewEgg ShellShocker. And, I set up a 3 disk RAID5. Sadly, it didn't last very long....one of the drives failed while I was building the array. I exchanged it for a new drive with NewEgg, and waited for it before trying again. While I was waiting, I formatted it a bunch of times and learning about smartctl and various things of drive repair. One of the remaining two original drives, was showing signs of slow death and one unrecoverable sector. When, the new drive arrived...I did a long self test and a quick, but full, format....taking a couple days before I created the 3 disk RAID 5.

Once, that was done, I created a new big filesystem that is /var/lib/backuppc to have backuppc on 'orac'. Initially a 1TB filesystem.

Then one day, the bad happened. A drive on 'gumby' failed. It was time to stop putting off figuring out how to setup backuppc and start putting stuff into it. It turned out to be a lot easier than it thought to get started, though I did have to rebuild smbclient to have a longer timeout to get it successfully complete a full backup of a given partition. I then learned some other stuff and fine tuned the configs.... One big change was I broke out the windows hosts into individual partitions (ie, gumby_c, gumby_e, gumby_f), and came up with a 'semaphore' solution so that it wouldn't backup more than one partition at a time from a windows host. Eventually, I had all my systems in it (it fully backs up everything except itself, where it backs up only key parts....) I even got it backing up my work Mac Book Pro.

I later grew the filesystem out to 2TB.

Pages: 1· 2

05/08/10

  01:30:12 pm, by The Dreamer   , 956 words  
Categories: Stuff, Home Theatre, Computer, Home

Got Another PowerSource 400

The other day, as I was rebuilding my 5 disk RAID array (which I mean to blog about someday)...for the umpteenth time. A storm came in one morning....this made me concerned about losing power and breaking my RAID in some bad state (it had happened once before). Now I did have the computer and its two disk arrays (and as it turned out monitor) on a Geeksquad 1285VA UPS. And, more serious now that I have quite a lot of data backed up onto this array using backuppc. Had gone through some scary periods where I thought I'd have to start over from scratch.

But, decided that may it was time to put it on a PowerSource 400, like my other two Linux servers. So, I went to my usual source....not available from there, but it listed 3 other sellers; two selling for substantially more than it used to sell for and one selling refurbished units. I went looking around online for other sources, including one other that I had considered as an alternative option (because they shipped using FedEx ground). Found that pretty much everybody that had listings for it, showed it as discontinued and not in stock. I check eBay, there were a few listings...but they were mostly of the store demo variety....seemed too risky for me, given past experiences.

So, I put it in my cart for the next time I was going to place a home bound Amazon Prime order (a PowerSource 400 is a heavy item, so even if I don't know when it'll arrive...I wouldn't want to be lugging it back from the UPS Store).

As it happened, the seller shipped it by UPS Basic, and the mail man showed up with it on the day that I stayed home sick....ran the bell twice and then left it on my door step (took me a while to unmask, get out of bed and find some pants). I didn't immediately set it up....but found somewhere to plug it in to at least charge. I was fully discharged, so it would take a while.

Later that evening a big storm came into the area, alert said golf ball sized hail....it sounded pretty intense out there. Just had to happen as I was trying to do the UPS swap. Discovered some oddities about how I have things run for power around my desk that I had forgotten about. But, I think it is all sorted out now. Though I may opt to move the monitor to another UPS at some later point.

Currently, monitor, server (orac) and the two raid boxes (2 drive - RAID1, 5 drive - RAID6) are on this 'new' PowerSource 400 and its reading 250-260W.

Annoyingly the literature doesn't give an estimate for loads >100W on the PowerSource 400....so I'm not really sure how much time I'll get at this...but hope its something. For comparison. 'lhaven' on its PowerSource 400 is reading 100-110W, and 'box' and the network gear (5 port gigabit switch and g access point) on its PowerSource 400 is reading 150-160W. I may pull the access point off the UPS at some later point in the future, since it is deprecated as I mainly use my Airport Extreme now...which is in another location and on a PowerSource 400.

That other PowerSource 400 is reading ~130W...it has 2 TiVo HDs, both with DVR Expanders, router, 16 port 10/100 switch, and the Airport Extreme. I was originally planning to add a RAID USB storage device to the Airport Extreme...though not sure now...that I have my work Mac Book Pro set up as a client to backuppc. (it also rarely comes how now.)

I don't think I have the courage to test how long any of my PowerSource 400s will actually last....but so far I've been happy with the ones that have endured the few extended outages I experienced last year.

I wonder what will be the successor to the PowerSource 400....and whether there'll be more PowerSource 400s, or what, in the future for me.

Pages: 1· 2

2

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 19 years 3 months 24 days 18 hours 37 minutes and 44 seconds until the end of time.
And, it has been 5 years 9 months 2 days 19 hours 25 minutes and 12 seconds since The Doctor saved us all from the end of the World!

Search

September 2018
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 0
This seal is issued to lawrencechen.net by StopTheHacker Inc.
CCMS

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime