Category: "BOINC"

Pages: 1 3 5 6

07/03/10

  04:52:53 pm, by The Dreamer   , 840 words  
Categories: Hardware, Software, Computer, BOINC

lhaven upgraded

AKA the end of RedHat 7.3.

For sometime, I have thought that it was time to upgrade 'lhaven' to a more modern release of Linux.

For the longest time, 'lhaven' has been running RedHat 7.3 (it was 7.2, but then I discovered Fedora Legacy...and they were providing patches for RedHat 7.3) And, there are still some production servers running this release, but I no longer have to support them...as I no longer work there.

The problem was that I had compiled a lot of custom apps over the years, that would be difficult to upgrade to newer distro/release of Linux. Since they were done without though to going to a different distro. 'lhaven' did used to run older versions of RedHat, and had been upgraded to where it stopped. But, to go to another distro would require a major effort. And, some of the apps were hard enough to get working to begin with. And, were some what fragile.

'lhaven' has also gone through some hardware iterations. The first major was when the Cyrix 233 that it was one burned up (a transformer had blown a phase, causing really low voltage before it went out....) though more likely it was its return after the outage with none of its fan able to spin. It was working for a while...but then there was smoke, and it all ended.

Got a Duron 800Mhz machine, which grew to an Athlon 2000....and had its motherboard replaced after the icepocalypse. The icepocalpyse was the first time I had to seriously look at upgrading from the old RedHat 7.3....but later I found a compatible motherboard and got the system to boot. The machine I bought at that time became 'orac'.

Later my use of ReplayTVs dropped off, and the one of the main apps that used datadirect for guide data was never successfully updated to support the newer schedules direct service. And, that was one of the things I didn't want to touch. But, now it is gone.

More recently, I started moving some of the other things that ran on 'lhaven' to 'box'. Namely, MRTG and cacti. I also updated all my linux servers to be able to handle mail for my home network, with the local mailboxes on 'box'. Also moved secondary DNS to 'orac' (someday I plan to get fallback DHCP on 'orac', but that'll probably come later.....) During the icepocalypse I had moved DHCP and primary NTP and DNS to 'box'....'lhaven' came back as secondary, because the old 'gumby' was sufficiently broken that I couldn't get it to not require 'lhaven' to function.

So, what I did was install ubuntu-10.04-alternate-i386 to become the new 'lhaven'. Which was the suggested to do RAID at the start, it had been a long time since I had done it, but the last time I had...it was a server install. But ubuntu no longer supports 32-bit hardware as servers, but both 'lhaven' and 'box' are 32-bit machines.

Took some figuring out, but its all done now. Yes, there's a desktop on all my Linux boxes, though 'lhaven' doesn't seem to be really up to the task. The video seems pretty poor and fuzzy compared to the other Linux servers. Perhaps I'll see about replacing its integrated video with an NVidia card of some sort...what that does CUDA, though it'll have to be a PCI card.

Anyways....after the install was done, I installed a few basics...like boinc and called it a night.

Full story »

05/18/10

  08:29:00 am, by The Dreamer   , 703 words  
Categories: Software, Computer, Networking, BOINC, Ubuntu

'Accidentally' Upgraded 'box' to Lucid

Last night I wasn't thinking....running into the fact that my boinc-client package is broken on 'box', I thought..."why isn't it running the boinc-client from Lucid?" And, I proceeded to fix it with "apt-get"...and then realized that I'm still running karmic and unbreaking it wasn't. The boinc-client pre-Lucid is too old for a project I'm in, and it is annoying how ubuntu doesn't update packages within releases (which get's really annoying with LTS.)

Anyways....I decided the way to resolve the mess I had now made by downgrading my boinc-client, was to upgrade to Lucid Lynx 10.04LTS. It was my plan to upgrade both my Ubuntu servers to 10.04LTS (the other being 'orac' which is currently 8.04LTS)....but I was going to put it off to when I had more time and allow time for the release to stabilize (given all the issues I had when I first started running box on fresh Karmic).

So, it started....things got a little annoying, in that the upgrade requires attention....and I didn't want to spend my whole evening watching it upgrade. So, I'd check it now and then, and sometimes find it stuck waiting for me to make a decision for it, though the first one where it wants to restart stuff after a pam upgrade...that's annoying. Just do it okay, stuff it restarted weren't working right along the way anyways. Namely I found that I couldn't access websites...at first I thought the squid had become dorked, and I couldn't restart it because invoking /etc/init.d/squid said it was now a service...but using service didn't find it. Though later I realized it wasn't working because DNS was broke ('box' is my primary DNS server)... I was able to restart that in the usual manner.

Partly because of the pauses, and a bit due to slow download....it wasn't looking like I would finish before 'bedtime'....but it seemed that it would be close enough.... It wasn't, but I ended up staying up to the bitter end. So, that I could reboot and do a quick check that all was clean.

Namely, I checked that named, dhcpd, ntpd and squid were running (since these were some key services of this server, and were ones that often failed to start after boot in karmic...especially named. Manual start always worked...at one time I was restarting these services in rc.local where it always worked rather than at the 'normal' time).

Then I went to fill in the missing icons in my launcher panel....there were two holes, there also seemed to be a hole in the tray area. The missing icons were Evolution (which I right-clicked to make reappear), and boxee (which I installed the latest of). I then called it a night.

The next morning, I continued to poke around some more....adjust appearance, add some chat/broadcast accounts...and look into my ubuntuone issue....first the tray thing was missing, apparently its by design...but, I don't remember that. I poked around some more and some more....then I looked at 'ulkc' and saw that it also didn't have the tray applet anymore, and I just didn't miss it... So, I then went to check that it was connected to my account and sync'd. Actually, it really was syncing, etc. When I was at Penguicon, I had put a copy of the pictures I had taken into my cloud...expecting to see them later on 'box' when I got home. But, it would never appear. Upgrading 'ulkc' didn't help things.

During the poking around, I disconnected 'box' and reconnected...and that apparently fixed whatever was wrong, as it started syncing...and soon the folders appeared.

While this was going on, I thought that maybe I would need to finish things up by remote....so sadly I discovered that remote desktop still doesn't work in Lucid. Turning it on, consumes 50% of my CPU. My 8.04LTS (orac) doesn't suffer from this problem. But, I want to bring both servers in sync eventually, so I can see about getting failover for dhcp working between the two.

Oh well....at least it seems more successful than when I had upgraded 'box' to Karmic. And, now I'm at an LTS where it can stay for the next 2 years.... We'll see what happens when I upgrade from 8.04LTS to 10.04LTS next month....

05/13/10

  06:53:48 pm, by The Dreamer   , 818 words  
Categories: Hardware, Software, Computer, BOINC, Storage

Good-bye Gumby, Hello new Gumby

So, I decided yesterday...in the midst of a tornado watch, etc. that it was time to pull the plug on the old Windows 2000 box known as 'gumby' and set up a new 'gumby' using the off-lease Lenovo Thinkcenter M55 that I got from TigerDirect when I got back from Penguicon. Odd that last year when I got back from Penguicon, I got a Lenovo Ideapad 3000 v200....the thinking then was that the 9" netbook was a little too small for my Linux laptopping needs, so I got a 12" laptop....thinking now is a 12" netbook or something, but that'll be another story. This year's thinking is that the bookpc (Pentium 3 933MHz i815 512MB), running Windows 2000 Professional, was getting to be too slow for my needs, and maybe I would get one of those Windows XP Pro boxes from Tigerdirect, and actually run it.

The previous two IBM Thinkcentres I got from Tigerdirect got turned into Linux servers....

The odd thing of course, is that this new computer is somewhat more powerful that my main Windows desktop ('tardis' - Pentium 4 3.2GHz w/2GB)....as it is a Pentium D 3.4GHz w/2GB. (And, there are already plans to up to 4GB of memory....plan to upgrade 'orac' to its max of 8GB from its current 6GB...and the 2GB displaced is compatible here.)

After taking the old gumby apart and moving it aside, I put the new system in place...adding a firewire card (an adaptec one left over from my early iPod days) and a USB to PS/2 serial adapter to use it with my existing 4 port KVM. I left the two firewire drives from the old gumby detached for now.

I then setup and activated the Windows XP and started working it back into my home network....then added the external drives back. I then started working on tweaking it to my preferences and installing common apps like firefox.

During this I did a restore of old files from backuppc, and that went great....so I queued up a pile more. And, then installed the ever important BOINC...and set into the long process of reconnecting to various projects.

I then continued to install various common apps, along with a few extras that I think could be useful for what I do on the machine...and even better now that it is faster and has more memory. Two things that I used to do that got left behind were WiRNS and DVArchive....but I got Poopli Updater working again. Had stopped using WiRNS a few days earlier with my remaining ReplayTVs....

Suddenly it was 10:30pm....

I poked around a bit more then next morning and a little bit more remotely....so much nicer now that the machine has more memory and processing power.

Even though I'm going to reestablish getting it backed up in backuppc, I decided that I want to still have local disk-to-disk backup using Retrospect or something to an external drive. The original Maxtor OneTouch II drive that I used to use for this had died, and redeploy of an old internal drive had also gone away....but I had used Retrospect's restore to recover from bare metal before, and that's something backuppc doesn't do.

The question was how I do get Retrospect back on to this machine? I considered quickly buying a new external drive (wasn't today's shellshocker....wait I'm boycotting buying harddrives that way aren't I?) and I just couldn't get myself to pull the trigger on one at the KSU Union Computer Store....perhaps next week....

While I was looking around...I noticed that the Retrospect had stopped running on my other Windows computer (tardis)....in fact it had last run on May 13th, 2009. !!! I poked around trying to find out why it wasn't working...but gave up.... Since I got home I got it running manually, guess I'll make a note to check later to see if it runs automatically again.

Probably time to update the restore cd.

Meanwhile, don't feel that in a hurry to get that last step for 'gumby' in place. Though upgrading and replacing harddrives is certainly something I will eventually want to do.

Running Acronis MigrateEasy might be interesting. This is the tool I got when I wanted to upgrade the 80GB drive in 'gumby' to something bigger. First it was to a 250GB, but then I found that the BIOS in the machine wouldn't handle larger than 137GB....so I then used it to go to a 120GB drive. Now the new 'gumby' has a 160GB drive....and I'm sure I'm going to want to upgrade eventually. I reinstalled the program, but one of the things the install wizard complained about is no floppy drive....ya...first desktop I've purchased that didn't have a floppy drive, hmm...

May have to look at upgrading the MigrateEasy or something. Though I think replacing the current external drives will be first on the list....since I already lost one of the 3 a while back.

Think tomorrow or later tonight, I'll add 'gumby' back into backuppc.

04/02/10

  08:16:22 am, by The Dreamer   , 300 words  
Categories: Hardware, Software, Computer, BOINC

box now has 2GB

A couple of days ago, I got a second stick of 1GB PC3200 DDR memory...and last night I finally got around to upgrading 'box' to 2GB. I had previously throwing a 1GB stick into a geeks.com order to bring 'box' to 1.5GB.

Nothing special of note happened with either upgrade. Just that I now have the maximum for this system, and it should allow it to better run BOINC work.

Though the current RNA World work assignments are calling for memory that I only have one machine that has at least that much memory....but it has 4 cores, so it can't run more than one RNA World at a time...and if I mix in other work with RNA World....the RNA World jobs always miss their deadline, because the estimation perpetually wrong.

Anyways....after I had done this...it occurred to me that I had done something odd....my main desktop (known as 'tardis') is suffering with low memory (firefox keeps consuming more and more memory...sometimes its consuming over 800MB....not to mention all my CPU....and then I made that mistake of upgrading to Thunderbird 3....plus Tweetdeck is pretty big too) Why am I not upgrading the memory in there....it has 4 slots, currently filled with 512MB PC3200 DDR memory. And, I should be able to change two of the slots for 1GB PC3200 DDR memory and everything should work. Could do 4GB, but don't think it'll see it all.

Though that computer was pretty temperamental on what kind of PC3200 memory it got....though when I do get around to finally replacing that computer, the 1GB sticks would probably go well in to 'box'....had I thought about this process better :lalala:

Wonder if there'll be hardware upgrades to my main desktop between now and when I finally get around to replacing it. Think the machine turns 7 soon.

03/21/10

  04:42:08 pm, by The Dreamer   , 688 words  
Categories: General, Software, Computer, BOINC

trying to switch to Quicken Premier 2010

This is the second last weekend that I can make the switch to Quicken Premier 2010, before my copy of Microsoft Money Plus Deluxe expires.

It had been kind of annoying the last couple of weeks, with Microsoft Money warning of impending expiration and asking if I want to renew....where the renew doesn't do anything because Microsoft has discontinued the product, etc.

I'm sad, I've been using Microsoft Money since 98 (the version, I started using the software in 1997) to manage my finances.

I had originally intended to learn about Quicken and purchase it in December and start using it in the new year. In parallel to Microsoft Money and slowly migrate to it. Because I had heard horror stories about the conversion process (import/export and lose lots of info/detail)....but then I heard that there was going to be a direct conversion process available. Though the intent of the timing was still there....but other things came along and I got busy, so it got put off...and put off.

But, I had envisioned that I would finally purchase the software and make the conversion after I did my taxes (and hopefully before Microsoft Money Plus expires.)

I had never actually seen the expiration message before, usually upgrading to the latest version of Microsoft Money before well before then. Though I usually skipped a version here and there. Namely the progression was like 98, 2000, 2001, 2003, 2005, 2007, Plus...I'm pretty sure that's right, vaguely recall having 2001 and making the switch from even years to odd years. There was something that was a bug in Microsoft Money, that was finally fixed in the 2001 version. Or it was some online download data format change, or both.

At the time it was one of the main reasons I was resisting the abandonment of Windows and switching to a Mac. Unfortunately, I've acquired a bunch of other things since then that are Windows only. Though VMware or VirtualBox was a consideration...there is a new wrinkle in why I'll likely go with a Windows box as my next host. That's CUDA projects in BOINC are mainly for Windows systems. There are a few Linux ones, but then only 64-bit Linux.

Anyhoo....I decided that this was the weekend to make the start. I had been moving the software in and out of my Amazon.com cart trying to decide on when I would finally get it. But, then I decided that I would opt to getting via Amazon Download. Part of me wanted the warm fuzzy of having a physical CD, that I can then lose when it comes time to reinstall...not sure what I'm going to do with all my apps when I finally get around to buying that new computer to replace my old circa 2003 computer.

I bought it and downloaded it yesterday, and figured I'd get to doing it today (Sunday).

Well, so far it hasn't gone so well. Everytime I start, and select conversion....it goes for a very long time, and then crashes. I worry about whether things are right and don't really want to go through the 12+ years of records to see what's missing. The initial screen doesn't look right to me, so that doesn't help....though who knows.

I then tried running file repair, still crashed. Removed my password (even though it did seem to have an issue), still crashed. Repair again....

Not sure what I'm going to do now. Wonder if I can take a couple weeks off from work to go through everything and see if things are right, etc.

:##

Or maybe I'll just accept no more online services and stay with Microsoft Money Plus. Though its going to have a big impact on my daily routine, and not sure what it'll do to my account tracking. There are accounts where the only updates I get are through online services, missing statements every now and then, etc. Plus the online service downloads have helped me catch fraudulent activity on my cards much sooner than if I had to remember to check the card sites manually or review statements.

Hmmm... :hmm:

Plus there's still that whole, what do I do when I finally upgrade to a new computer....

10/31/09

  01:36:00 pm, by The Dreamer   , 568 words  
Categories: Software, Computer, BOINC, Ubuntu

upgrading to Karmic Koala

I hadn't intended to start upgrading systems to Karmic Koala so soon...since the servers are kind of pegged with other people downloading and upgrading. But, playing around with do-release-upgrade on my Ubuntu server at work....at first (on Thursday) it didn't show the release and the later it did.

Since its running as a Guest on my Solaris 10 x86 desktop, in VirtualBox, I could take a snapshot and let it go. Plus its a pretty minimal server...its just to run BOINC. It estimated that it would take about 4 hours to download what it needed. Guess it doesn't take advantage of the I2, or things were pretty saturated....

When I came in yesterday, it was still going...was kind of hard with it blanking the screen and stopping waiting for input...but it kept chugging along and eventually upgraded and all seemed good.

So, last night I decided to pull the trigger and upgrade my notebook (ulkc). It warned about a lot more stuff that was unsupported and would be removed, and lots of warnings about all the 3rdparty stuff. But it gave an estimate of 10 hours to download and asked if I wanted to continue.

Sure :lalala:

When I got up the next morning it was waiting to ask about differences in my mod blacklist, it wanted to add pcspkr but it wasn't going to keep the modules I had blacklisted...and no option to merge or stuff....so I told it to keep my blacklist. Wonder what'll happen when I do box, since there's nothing connected to its sound card....so its only way to make noise is through its pc speaker.

After it was done and rebooted, two things didn't work. The firefox button on the panel, since default had changed from firefox 3.0 to firefox 3.5 (though I've been using 3.5 since it came out, just replace /usr/bin/firefox with a new symlink)....easy enough to replace. And, virtualbox.

I reinstated the 3rdparty sources for apt, and checked for updates. Guess there's no Karmic repository for Boxee yet. The only thing that did upgrade was dropbox.

So, I uninstalled virtualbox (it was 2.2) and reinstalled it (3.0 from the karmic repo). And, then I tested it.

It worked.

Full story »

06/20/09

  02:05:00 pm, by The Dreamer   , 707 words  
Categories: Hardware, Computer, Networking, BOINC, Ubuntu

'box' is starting to return

I got the new-ish computer out and started looking at what I could change in it....while digging into it, I discovered it has a SATA drive. So, that meant no moving the old 'box' harddrive into the new 'box' hardware. So, that narrowed the return options to one.

I transplanted the CD burner in the old 'box' into the new 'box' and then set out to get ubuntu-9.04-server-i386.iso. First tried downloading via OSL....that was going slowly. Noticed there was a .torrent file available, so I decided to get it that way. That went much faster.

But, then I got distracted...ferret, supper...but eventually got around to burning the image and starting the install process.

After remembering the desired sequence of answers that would result in something that I would like (and having it set itself up with out DHCP)...I had ubuntu server with DNS-server, SSH-server, and Mail-server. I set out to work on being able to access the old drive on the 'box', after some thought, I decided to load on 'ubuntu-desktop' I like have lots of windows, and which a much faster system there's other things I'll probably be doing on here now/in future. 'box' started as a Pentium-75, and is now a Pentium 4 3.2Ghz w/HT. I also discovered that the machine has a GigE NIC (it didn't mention this on the website....)

I let 'ubuntu-desktop' install overnight, and found it didn't work in the morning. Had to introduce another 'sudo apt-get update' to get things along. I threw some other stuff I was starting to find that I wanted/needed like, binutils, ncftp, ntp, boinc... and then bounced the box.

Got a USB adapter for the old drive, but 'box' wouldn't see it automatically. It doesn't seem to load usb stuff on boot, looked around but decided that might be a good thing....for now. Doing 'lsusb' would make the drive appear....

I continued to setup the environment, decided to leave it using bash...even though my other home linux servers use tcsh. I also installed GKrellm and worked on getting postfix to talk to relay through my outbound.mailhop.org account. Found that I had to use smtp_tls_CAfile=/etc/ssl/certs/Equ....pem instead of smtp_tls_CApath=/etc/ssl/certs. And, then I messed up resolv.conf (I had installed and tested vpnc, its not quite working right...but its probably a K-State thing than the client....I knew it was working on my other ubuntu systems and I used the same config file, but didn't check if it still worked on those other systems). Then I discovered that my local DNS was kind of confused. Because 'box' was back on the network, but not configured as the master or knowing of my local domain....it was getting things wrong. Using my dyndns domain name is internal and external probably compounded things.

So, that moved up getting DNS configured. Continuing my environment setup, I remembered that I hadn't updated my border routers for IVS without 'box'.....since 'box' has cron jobs to check that I'm my IVS is working....so I went off and did that...and while I was on the computer that I also do my boinc managing from...I worked on getting BOINC running on 'box'.

I opted to use the apt-get install of it, and let it run a system service (instead of out of my local account and the keep it current to the latest stable version...which is newer than the ubuntu one?) Attached to a bunch of projects, discovered new 'box' is much noisier with its CPU running full tilt all the time....though P4-3.2GHz CPUs run hot...I forget what I had now in 'box'....Cele2.2??? Got all the usual projects attached, except Spinhenge...maybe it won't be bad if its not. Not all boxes run all projects that are available, aside from some projects not support Linux. There are differences based the resources of the minion. New 'box' being faster and doing HT, I have it doing more than what old 'box' did.

Now off to do morning stuff and run some errands before diving back into finishing new 'box'.

I think when I return, I'm going to work on dhcp server peering. So that should I ever lose 'box' again, I won't be with out DHCP.....though 'orac' is not the kind of box I hope to ever have to rebuild (another 'lhaven' :>> )

Tags: box, dhcp, dns, linux, ubuntu

10/25/08

  11:49:04 am, by The Dreamer   , 562 words  
Categories: Software, BOINC

Norton Antivirus 2009 hates BOINC and its Users

Well, before I posted on this subject a few days ago, I had submitted a support request using Norton Antivirus 2009. Shortly after the the blog posting, I got an Email for Symantec's PR company....sent to my work address. Not via the blog (or the associated email address).

Of course, that doesn't matter, my employer banned Symantec and Norton Antivirus on PCs a couple years ago. In fact, they would actively scan computers connected to its network to detect, and block access to, computers that continued to use the software. We have a site license for Trend Micro, and policy that requires it to be installed on all PCs connected to our network (including personally owned ones). The site license extends to allow (current) students and employees to use the software on their home computers, even if they are connecting via a 3rd party ISP.

Of course, TrendMicro doesn't support Mac or Linux users, but the use of Antivirus software is still required. A bulk license for software for the Mac exists, with a periodic review of how many are being used...and ClamAV is the recommended solution for Linux users, and I thought Bradford checked for it (along with being current on patches) in the dorms.

Anyhoo....I eventually got a response for Symantec Technical support. It was try to disable a feature of Norton Antivirus and see if the problem continues. If it does, then it isn't their fault.

Lucky for them, it is their fault. I disabled Auto-Protects Advanced Protection feature...to resolve the issue.

Then things continued to be less than helpful. Vague response on how they want me to be protected so make sure I keep running LiveUpdate....though are they saying they'll turn it back on when remotely when they think it'll be resolved or will LiveUpdate tell me that it has finally resolved this issue.

It did a provide a link suggesting that I submit information about the false positive to. But, it was for false positive phishing urls. And, submitting the false positives from "Advanced Protection" yielded the response that the submission does not appear to be URLs so, therefore, "We have concluded our research
of your submission and will take no further action."
. Even though I included reference to the support incident ticket that led me to the form.

I emailed back, and was provided with yet another form. With the note that "Incomplete submissions and requests that are not deemed to be genuine will not be processed.". The form instructions say that it must be submitted by the software vendor of the false positive.

In other words, they don't care about its users.

Category: Resolved Security Risks
10/19/2008 16:51  High  prepare_dpf4_9.51_windows_intelx86.exe detected by SONAR        Removed
10/17/2008 19:11  High  prepare_receptor4_9.51_windows_intelx86.exe detected by SONAR   Removed
10/19/2008 16:52  High  prepare_dpf4_9.51_windows_intelx86.exe detected by SONAR        Removed
10/19/2008 16:51  High  prepare_dpf4_9.51_windows_intelx86.exe detected by SONAR        Removed
10/17/2008 19:12  High  prepare_receptor4_9.51_windows_intelx86.exe detected by SONAR   Removed
10/19/2008 17:08  High  summarize_results4_9.51_windows_intelx86.exe detected by SONAR  Removed

Category: Quarantine
10/19/2008 16:51  High  prepare_dpf4_9.51_windows_intelx86.exe detected by SONAR        Removed
10/17/2008 19:11  High  prepare_receptor4_9.51_windows_intelx86.exe detected by SONAR   Removed
10/19/2008 16:51  High  prepare_dpf4_9.51_windows_intelx86.exe detected by SONAR        Removed
10/19/2008 17:08  High  summarize_results4_9.51_windows_intelx86.exe detected by SONAR  Removed

So, now I'm going to ask them on how to remove this crapware. :##

10/20/08

  06:47:28 am, by The Dreamer   , 174 words  
Categories: Software, BOINC

Norton Antivirus 2009 hates BOINC

A few days ago, I got a LiveUpdate Notice that I could upgrade to the latest version of Norton Antivirus for free as part of my annual subscription.

This was new. In the past, I just kept renewing the subscription of Norton Antivirus...until they decide that the version is too old and force me to buy the latest version. That's happened a couple of times on this computer (the other computer died earlier this year, but I wasn't planning to renew its subscription for this reason....it had become a dedicated BOINC machine)

Well, upgrading proved to be a mistake. The advanced auto-protect feature, which "Provides real-time protection against threats and proactively detects unknown security risks on your computer." Keeps reporting that certain BOINC processes as high risk and removing them.

Of course, it nags annoyingly if I turn the feature off....but running BOINC is more important to continuing to be a Symantec customer. So, I guess I'll be looking to replace NAV2009 with something else before my subscription expires in 90 days....

06/22/08

  10:14:26 pm, by The Dreamer   , 360 words  
Categories: Hardware, Computer, BOINC

SIDRAT R.I.P.

That's my Satellite 5105-S701, which has the host name 'sidrat'.

The machine is like 6 years old...there was a plan to upgrade in 3, and then 4...and then 5....and perhaps someday I will upgrade. Though what I've been thinking of getting...I'm not sure it would be called an upgrade. Been looking at Netbooks (don't know if I'll get one with XP or not, more interested in the idea of running Linux....but might get the XP so I can dual boot....or because the Windows version is the more powerful unit)

IE: HP MiniNote 2133 is either a 1.0 or 1.2GHz with Linux....but with Vista it comes as 1.2GHz or 1.6GHz. Guess they hate Linux users. Though I'll likely get something Atom based.

Anyways. The old laptop pretty much has been tethered to its powercord for some time. Not sure if I can get batteries for it. Though battery life was pretty poor new, now almost non-existent. But, a while back....while my brother, and his wife, were in Ghana....getting knocked down with Malaria. I had the laptop running 24x7 doing BOINC....malariacontrol.net

Over the last few days...I would come often find the laptop hung. I'd reboot it and forget about it.

Well, it was that way just a moment ago....I rebooted it, and almost immediately it hung again. It is summer now....and I can't remember when I started doing the full-time BOINC'ng...but it would've been late fall last year. So, I suppose it might not be happy about the warmer temps. Though I may have cooked it to death.

But, this wake time...and evening....so it is a cool time in my condo. And, if it is finding that too warm to stay up. There's probably something else wrong. Perhaps the CPU fan has stopped working. Since it was over $100 for a RFE fan for the desktop, I'm sure it would be pretty hefty to get parts for the laptop and probably not an easy self-repair project.

Guess its time to write off the old laptop.... Only problem is...I think its too late to buy a laptop with Windows XP now.

Hmmm...

1 3 5 6

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 19 years 3 months 22 days 21 hours 21 minutes and 51 seconds until the end of time.
And, it has been 5 years 9 months 4 days 16 hours 41 minutes and 5 seconds since The Doctor saved us all from the end of the World!

Search

September 2018
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 2
This seal is issued to lawrencechen.net by StopTheHacker Inc.
powered by b2evolution CMS

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime