Categories: "Computer" or "Android" or "Chromebook" or "Hardware" or "Printers" or "Scanner" or "Storage" or "iPad Air 2" or "Networking" or "WiFi" or "Operating Systems" or "FreeBSD" or "Other Linux" or "Ubuntu" or "Windows" or "Software" or "b2evolution" or "BOINC" or "CFEngine" or "Quicken/TurboTax" or "Virtualization" or "VirtualBox"

Pages: 1 2 3 4 6 8 9 10 11 ... 58

09/30/12

  11:49:00 pm, by The Dreamer   , 188 words  
Categories: Software, b2evolution

Finally upgraded b2evolution

From 4.1.3 to 4.1.5b.

Maybe I'm getting better at these small patches, because it didn't seem as hard to do. Or perhaps because I was able to figure out my own customizations and back patch them into the patch or that I'm getting better at where I put my customizations....

Plus one of them matched one of the patches....resulting in just shifts in line spacing and newer comments. &#59;D

Though was getting worried considering I put off applying 4.1.4 so long that 4.1.5 came out, and became 4.1.5b. Though I would have to do them separately, but then it occurred to me that if 4.1.5 changes anything in 4.1.4 it'll overwrite those files. So, all I had to do was three-way diff and figure out what from mine goes into 4.1.5b and lay that down on top.

Though I did see that I have files that don't exist in either 4.1.3 or 4.1.5b...probably left overs from much earlier 4.x versions. Though was surprised to see that a plugin was newer in 4.1.3 than in my version. Not sure how that got overlooked until now.

There's other plugins that need updating, but I'll do that later....

09/29/12

  10:50:00 pm, by The Dreamer   , 1626 words  
Categories: Home Theatre, Samsung HLN4365W1, Computer, Networking, AppleTV, HDTV, Roku XDS, Boxee, Samsung UN50ES6500F, 3DTV

It's the end... but the moment has been prepared for. Sort of...

And, it almost didn't regenerate in time....

First it seems my first TiVo HD is nearing its end. With it constantly locking up, and other problems that started ... but the moment had been prepared for.... With the Premiere Elite that I had gotten recently.... Just need to work on watching or moving the shows that are in it. Then it would free up the My DVR Expander to add to the Premiere Elite. And, since I have lifetime service for it...I suppose I would look into a Weaknees upgrade for it. But, I'll stay with eventually returning the cable cards for it.

And, now the end of my Samsung HLN4365W1X seems to have come. It came to me on May 30th, 2004, and it started having its latest issue on Sep 21st, 2012. Guess just over 8 years. I kind of knew it wasn't going to last forever. Since, it had consumables (bulbs) and mechanical components (cooling fans & color wheel).... and eventually I would like to upgrade.

I had replaced the bulb a couple of times....getting about 3.5 years.... Which is kind of sad, since I had gotten the 3 year extended warranty, because of the stories of premature bulb failures in this model. Now, its hard to tell what's wrong...the internet is kind of mixed on matching my symptoms with what might be wrong. But, I suspect the Ballast. It'll eventually come up, but it makes a lot of noise...and then it can't be turned off. It did settle down on Saturday so I could watch my Doctor Who...so I held off a bit on pulling the trigger to replace it, though I probably shouldn't have. I did some research on whether this was something I could fix myself, but in the end decided that it wasn't worth the hassle given the price of what a new TV is and how much sooner I'd get it. Just means, the other thing I was wanting to get this year will have to wait another year. Though its starting to look a lot like Apple isn't going to come out with anything new this year anyways.

I kind of had envisioned someday getting an LED TV in 1080p, and 50" that fits into my stand....perhaps even 3D.

The stand is just wide enough to accomodate a 50" providing the bezel isn't too wide. But, when that DLP came out, I wasn't ready to make that kind of leap. And, until recently, LCD/LED displays are either like 46/47" or 55"....the 50" size seemed to only be Plasmas.

And, I had considered whether it would be so bad to get a Plasma....though I think I want to not worry about when my next display is going to be for a while. So, LED/LCD TV is probably what I'll have to stay with.

Wonder if I can get something delivered next Saturday....

Pages: 1· 2· 3

09/16/12

  06:45:00 pm, by The Dreamer   , 478 words  
Categories: Hardware, Computer, Storage, Ubuntu

ulkc has 8GB of memory

So, a while back I read that it would be possible to upgrade a number of older computers from spec'd maximum to a bit more.

Officially, the maximum supported memory of the Lenovo 3000 V200 (ulkc) is 4GB... My other laptop also supports a maximum of 4GB, but I suspect that between them, I should be able to upgrade one or both to 8GB. Though I prefer to have it work in this one, since I use this one more.

So, a while back I had a newegg coupon to get laptop memory, so I got a pair of the SO-DIMMs. But, then I set them aside....and forgot about them.

More recently, I picked up a new battery for this laptop...and had it in the bedroom to run down and see how much life I would get. Online they sell aftermarket batteries for 4800mAH and 5200mAH. Though it turns out the original battery was 5200mAH.... So, that's what I have....anyways it works. And, I let the laptop rundown. So, I was going to try the memory swap after that. Though that was a few days ago....

Full story »

09/09/12

  07:06:00 pm, by The Dreamer   , 145 words  
Categories: Software, Computer, FreeBSD

NetBackup 7.5 on FreeBSD 9.0

There's a FreeBSD 6.x client for NetBackup, but when we upgraded to NetBackup 7.5...client installs stopped working, after ignoring the problem for a while (since the 7.0 client installs were working) until I had set up a new FreeBSD 9.0 server.

What I did was

  1. Install 'misc/compat6x' and 'java/openjdk6'
  2. Obtain 'fakegetfsstat.c' - and build it on a 32-bit FreeBSD host (I used the '/compat/i386' environment from building "32bit Wine on FreeBSD/amd64") and put it in '/usr/local/etc' -- there's probably a better place, but :lalala:
  3. check that '/usr/openv/netbackup/client/INTEL/FreeBSD6.0/client_config' has "compat_dir" set to '/usr/local/lib32/compat'
  4. Install NBU Client -- It still won't find java, so perform the steps it says using '/usr/local/bin/java'
  5. Edit '/usr/local/etc/netbackup'
  6. Shell

    --- netbackup.orig    2012-09-08 14:46:28.794900000 -0500
    +++ netbackup    2012-09-08 14:50:57.848900734 -0500
    @@ -73,10 +73,12 @@
         FreeBSD*)
             PS="/bin/ps -ax"
             # This can be removed once $ORIGIN starts working.
    +        LD_32_PRELOAD=/usr/local/etc/fakegetfsstat.so
    +        export LD_32_PRELOAD
             compat_dir=""
             os_major=`uname -r | cut -f1 -d"."`
             if [ "${os_major}-gt 6 ] ; then
    -            compat_dir=":/usr/local/lib/compat"
    +            compat_dir=":/usr/local/lib32/compat"
             fi
             ProcessorType=`uname -p`
             if [ "${ProcessorType}!= "i386" ] ; then
  7. /usr/local/etc/rc.d/S77netbackup.sh stop
  8. /usr/local/etc/rc.d/S77netbackup.sh start

06/14/12

  10:06:00 pm, by The Dreamer   , 1662 words  
Categories: General, Hardware, Computer, Networking, BOINC, Storage, Ubuntu, Windows, Printers

lhaven misstep - nForce4 blows OCZ

So, lhaven was this computer I bought specifically for Stanford's Quake Catcher Network project. This was because when I received my sensor, I found that it only worked on Windows or Mac. Linux would require the older sensor, which they weren't selling anymore.

Things seemed to work...except that the machine would lock up now and then. Well, it is Windows...so maybe I'll just schedule it to reboot regularly.

At first that seemed to help...but gradually, I was rebooting it more and more frequently. Eventually, I was down to rebooting it 5 times a week. Sometimes it would fail to restart, other times it would still lock up between reboots.

Eventually, they came out with Linux support for the sensor and I moved the sensor over to orac. That worked great for a while...and then it got a kernel update, and then starting VirtualBox would cause the machine to reboot. And, not just when I needed up update my Quicken. Because I was also participating in LHC's Test4Theory.

So, it was time to find a new home for the sensor. After moving it back to lhaven.

I looked for various low power x86 dedicated SBC or plug computer to run it. Though these things aren't cheap, so I'd want to do more than just QCN with it.

Then it occurred me...that I was overthinking this whole mess. Why don't I just install Linux on lhaven?

I haven't been looking forward to the leap from 10.04LTS to 12.04LTS. While Orac has a GT440 in it that's not being used, not sure what I would do for box....though I've been eye'ng either a GT218 or an NVS 300. It only has an LP PCIe x1 slot.... there are other concerns.

In the Scheme of things...I had planned to upgrade the video card in zen someday...and take its GT420 and change to an LP bracket and put it in lhaven. Hadn't quite worked out what I'll do about gumby, but it has since died...and when I get around to resurrecting it, I might have a Radeon HD5450 that I'll free up (not sure if it helps with BOINC, but eventually...I want all the systems using DVI....so I can switch to my new 4-port DVI KVM. DVI to VGA through the old KVM was horrible....plus keyboard issues with the old KVM, makes me wonder if I can wait until I can fully make the switch.)

So, I had downloaded 12.04LTS beta1, but never got around to install it anywhere....and when this idea occurred, 12.04LTS beta2 was just starting to appear. Though the question was, would I go with ubuntu, or try one of the other variants. Namely, xubuntu or lubuntu.

I ended up going with xubuntu 12.04LTS beta 2. I didn't hear about lubuntu until after I had started downloading xubuntu...so I envisioned that I would resurrect gumby with lubuntu....though so far I haven't gotten around to that.

Pages: 1· 2· 3

04/01/12

  08:03:00 pm, by The Dreamer   , 273 words  
Categories: b2evolution

Time to finally upgrade to b2evolution-4.1.3

Some how I screwed up copying the diffs over top of the site, so that when I put the new index.php...it didn't work. But, the updated conf files made it. (backpatching the multidomain stuff)

Oh I see what I did....I had copied into the top level the other dirs the first time.

IE:

Code

cp -rp inc/* ~/lawrencechen.net

instead of

Code

cp -rp inc/* ~/lawrencechen.net/inc

Guess I need to clean that up before calling it done.

Full story »

03/31/12

  03:27:00 pm, by The Dreamer   , 1112 words  
Categories: Software, Computer, Networking, Ubuntu, Windows, Printers, Scanner

I got a Brother DCP-7065DN

In a rather impulsive move, I bought a Brother DCP7065DN Monochrome Laser Multi-Function Copier via an Amazon Lightning Deal!

I had been considering getting a new laser printer for a very long time. I had ditched my old Brother HL-630 laser printer about a dozen years ago. This was a crappy printer from the start...with its grey background problem that they never seemed to resolve. Had gotten it from Future Shop of years way gone by....where it had been a special buy for them...so they were selling them really cheap. Kind of like the Canon BJ-5e bubble jet printer I had gotten before.... (It was a BJ-10e, but made cheaper just for them. And, used a special ink cartridge not used by any other model from Canon...at the time. Otherwise, I often wish I still had it....though when I moved from Canada to the US, it became kind of a problem to get ink for.)

So, after the Brother HL-630 was scrapped....I spent a long time thinking about my next laser printer....I was heavily leaning towards getting an HP Laser printer....so it was going to likely take a very long time before I would make a move. And, then I started to lean towards getting a Color Laser Printer.....and then I wanted built-in Duplex. And, having been spoiled by the HP Photosmart 8450xi, it also needed network capability....

There was an HP Color Laser printer that seemed to fit the bill, and it was popping up on sale now and then. But, then I upgraded to Windows 7...and found that not only is my old Photosmart 8450xi no longer fully supported in Windows 7, neither is the HP Color Laser printer that I had been considering.

So, that nixed wanting to jump on it the next time it went on sale. (Sale as in cheaper than it would cost to buy 4 new toner cartridges for it.)

So, the search continued....I started looking at Brother again....in current models, something like the HL-4150CDN or the HL-4570CDWT.... but, then I was introduced to a multifunction printer. Which actually was kind of useful. Being able to scan a document onto a USB drive. And, there's always the once a year or so occasion, where somebody wants me to fax something. I used to have a fax machine...first a dedicated thermal fax type thing, and later a refurbished HP OfficeJet v40xi. A power surge took out my first fax machine...and then a few years later...living in the same apartment still....a power surge took out the HP OfficeJet....

So, I then started to consider printers like the Brother MFC-9560CDW....plus the idea of color copying seemed useful, especially duplex color copying.

Of course, now its getting expensive to start and expensive to keep....

I also had this issue of printing envelopes....a capability I had lost when I upgraded to Windows 7. The Dymo Labelwriter that I had gotten from stamps.com didn't work on Windows 7. And, I didn't really want to buy a new Dymo Labelwriter to keep this capability. Eventually I canceled stamps.com, though still have the occasional postage need....which it would be nice if I could still print postage, etc. Think there are cheaper ways than stamps.com, but probably not from Linux.

But, then last December while visiting my parents...my dad snapped up a Brother HL-2270DW, and this was a pretty decent little printer. It was on sale for the holidays...but it does PCL emulation. I wish I had just gotten one of these for myself then, too.

Instead, I started to reconsider whether I really needed color laser. Around year end...there were things I needed scanned or copied, for things like taxes and FSA...so I was still was still leaning towards getting a multifunction printer of some sort. And, I kind of fell for the Samsung SCX-47xxFN, and then later the Samsung SCX-4828FN (about $400). The 4828FN adding Postscript emulation. I've always wanted a postscript printer....

Though these are still expensive printers. These ones had fax....and I did have to need to send a fax once this year, so far. If I were to leave out fax, it should've been something like the Brother DCP-8085DN (about $350)....which would've had duplex copying, and both PCL and PS emulations.

But, instead the Brother DCP-7065DN showed up as an Amazon Lightning deal for $80 (50% off)....I did a quick google search to see if it work on Linux, and some sites seemed to say it had PCL and PS as well. And, bought it.

Well...apparently its common in the industry to make similar internals/firmware across their product line with different features available or not, etc. And, Brother didn't even bother to remove PCL and PS from the capabilities page that the printer spits out or not advertise the LPD queues for these modes in its network info. But, trying to use the queues is like sending to /dev/null. This particular printer is only GDI (so in someways worse than the HL-2270DW ... currently about $120. And, then there's an HL-2280DW for about $10 more, and adds a scanner....a network scanner would be useful. Though a standalone scanner would be more useful during my situation where my primary desktop is dead.

But, I was able to get the DCP-7065DN working from my Ubuntu server, after following some websites on the subject. Namely..the detail that they only provided 32-bit deb's, and I have a 64-bit Ubuntu Server. I haven't tried the scanning feature, since the printer sits by TARDIS...and I have my Fujitsu ScanSnap S300M working on my Ubuntu server....though not sure if I've gotten the two-sided scanning part to work. So far the bills that I've needed to scan for FSA reimbursement have been one-sided.

But, the DCP-7065DN doesn't have a duplex ADF...so it doesn't provide an alternative. And, my other scanner is a Fujitsu ScanSnap S300! (I bought the Mac only S300M on a Black Friday sale, and back when I used to bring work macbook pro home now and then. Later I got the S300, when I had more FSA money to spend and wanting faster turn around...but wasn't bring the macbook pro home anymore.) A regular flatbed scanner has been on my wishlist...perhaps the DCP-7065DN will satisfy that need. Something to probably check out after I get around to finally upgrading TARDIS.

So, while it was a problem to find that the DCP-7065DN is only a GDI printer...it does currently work from Ubuntu...and sharing it out from my Ubuntu server is interesting. There's no native DCP-7065DN driver in Windows XP, but I just pick some Postscript printer driver...and that worked. And, it looks pretty good (compared to the early days of ghostscript...)

What what I'll do when I finally get around to rebuilding my Windows 7 desktop????

  09:18:00 am, by The Dreamer   , 57 words  
Categories: Quicken/TurboTax

[Solved] Quicken 2012 Annual Privacy Notice won’t go away

Link: http://tidystorm.com/577/solved-quicken-2010-annual-privacy-notice-wont-go-away/

Been getting annoyed that the Annual Privacy Notice in my Quicken 2012 Premiere keeps appearing and appearing and appearing....

Finally did a good search, and found this above linked article.

In my quicken.ini file, the GLB section, I had:

Date=0/0/1901

If I have it right, I should hopefully not see it until April Fools Day next year.... :lalala:

03/17/12

  06:53:00 pm, by The Dreamer   , 337 words  
Categories: Hardware, Software, Computer, Healthcare, Windows, VirtualBox, Quicken/TurboTax

CPAP Data Recovered

As I may or may not have mentioned, Zen failed to boot after it got the latest set of Microsoft patches on February 15th. After various attempts to recover, it has been declared lost. I haven't gotten around to resurrecting it.

So, I've been making do with a Windows XP VirtualBox that I have my on Linux system (starting to look like when I do get around to resurrecting it, I'm going to try 12.04LTS Desktop and Windows 7 in VirtualBox....)

Previously, it was just Quicken and then TurboTax. But, I've been wondering about my CPAP data.

First was EncoreViewer. How do I recover that historical data. I knew where it kept the files, because I had copied them from TARDIS into Windows XP mode. The question now was how do I get the files out of Windows XP mode. In the end, the answer was WinImage...to merge the differencing-VHD that Windows XP Mode uses, into a single file and then convert it for VirtualBox use. Could've gone direct...except that I found first try with WinImage didn't work...so second time I converted to a fixed VMDK file, and then converted the fixed file into a dynamic sizing virtual disk for use on VirtualBox.

Though later I realized that I only want it as read-only....to get my data back....anyways.

That worked.

Next question was how do I recover my data in SmartLink.

I installed it into my Windows XP VirtualBox, and wondered where does C:\ProgramData exist in Windows XP space....but, while poking around, I remembered it has a backup/restore database option...and wondered if I had ever done a backup.

I lucked out. The last time I used the software was the only time I had ever used the backup function....and that's just perfect, I restored from that and then did my latest downloads from both my xPAPs.

:cool:

Just have to see if I remember to do another download before my next doctor appointment. I didn't print anything, because I hope that by then...I'll also have my new printer. :))

03/10/12

  07:23:00 pm, by The Dreamer   , 287 words  
Categories: General, Quicken/TurboTax

Doing my Taxes for 2011

So, again this year, I bought TurboTax Premier 2011 as a download from Amazon.com. But, then on February 15th, my Windows 7 computer crashed. Or rather it auto updated and wouldn't boot. After a couple weeks of various attempts to fix it, I've written it off. Hopefully, my backups were good...and I'll eventually get around to rebuilding that.

In the meantime, I fired up my XP VM...installed Quicken Premier 2012 and recovered a backup of my Quicken data..and had been continuing to use that. So with likelihood of getting Windows 7 running in my home again anytime soon, being low. I reinstalled the recently purchased TurboTax Premier 2011 into the VM debated when I would make a start.

After the initial update, it noted that on or before March 8th, there would be another update. So I decided I would defer to then. I had intended to pop on to HRIS sometime before then to check something, but I didn't remember that I needed to do it until after I took the system down for planned weekend upgrades. As it was, there wasn't anything I needed from it anyways.

Pages: 1· 2

1 2 3 4 6 8 9 10 11 ... 58

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 20 years 3 months 24 days 10 hours 33 minutes and 16 seconds until the end of time.
And, it has been 4 years 9 months 3 days 3 hours 29 minutes and 40 seconds since The Doctor saved us all from the end of the World!

Search

September 2017
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
        1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30  
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 1
This seal is issued to lawrencechen.net by StopTheHacker Inc.
powered by b2evolution

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime