Tags: hpe-450t

06/29/11

  10:56:35 pm, by The Dreamer   , 849 words  
Categories: Hardware, Computer, Storage

Filled up PCIe x1 slots in Zen

When I had gotten Zen (HPE-450t), I couldn't resist and opened it up to see what it had inside, etc. And, one of the things I noted was that there were two available PCIe x1 slots.

Later during the initial setup, I found myself running out of physical USB 2.0 ports on the back. I did have a 7 port USB hub, but there's so many things out there that just don't like the extra layer of a hub. And, I had a lot of this things. While, I did later get a 24-port USB hub to help get everything connected to Zen. But, I felt that I needed to eventually get something in additional real USB 2.0 ports.

And, eventually I settled on wanting to get a StarTech 7 Port PCIe LP USB 2.0 Card (PEXUSB7LP). It actually only has 6 ports on the back, but it was the highest density PCIe x1 card I could find (there's an internal header, but its no use for me). I bought this back on Feb 3rd using Amazon Prime, of course.

Later as I was thinking of making my local backups go faster, I thought that I would grab one of the extra SATA RAID adapters (SIL3132 based)...that had come with the TR5M or its Rosewill clone...I didn't use either, because I had purchased on before I knew I was getting these enclosures for orac. And, the TR2UT that I had gotten initially didn't have a card....

Put that in Zen, and change how the TR2UT is connected to Zen now. Currently its using its built-in RAID1 ability and connected via USB2.0. I had tried both kinds of Windows 7 backups, but the file backups were taking longer than 24 hours to do the daily differentials...so I stopped doing that. But, the System Image Backup had saved me once before, so even though its a pain...I do that weekly...or try to.

I makes Zen pretty slow...the VSS really hurts things I guess, and it can take close to a day to run. Though it had been getting shorter, though for no reason that I know of. I used to start it at 11pm on Tuesdays, in the hope that it wouldn't impact me too badly come Wednesday night (I tend to be out the early part, so it would help). But, then it started taking less time. Perhaps there's been a Windows update to it. So, now I start it at 10am on Wednesday...usually well after I get my morning stuff done and off to work...and hope that in finishes before I return from my Wednesday evening activities....

Or come home to find out that it failed for some unknown reason and try again.

So anyways...on February 13th, I evidently bought a 2m eSATA cable from Amazon Prime for that project.

Meanwhile...Drobo S....

Full story »

12/26/10

  04:51:48 pm, by The Dreamer   , 1523 words  
Categories: General, Stuff, Hardware, Software, Computer, BOINC, Home, Furnishings, Healthcare

I got me an HP....

... an HP Pavilion Elite HPE-450t, customized with things like:

  • Intel Core i7-870
  • 9GB DDR3-1333MHz SDRAM
  • 1.5TB RAID1 (2x1.5TB SATA HDDs)
  • Windows 7 Professional 64-bit
  • 2GB NVIDIA GeForce420

Should be good for doing BOINC &#59;D

Now, I bought this system customized expecting to pretty much plug it in and go, only having to add externally attached peripherals to complete things. Though I do plan to do upgrades in the future, specifically I got the the 3 DIMM ( 2x4GB + 1GB ) configuration of slightly more memory so that I could potentially take it to the 16GB max at a future date without having to buy all 4 new DIMMs. If I had bought the 8GB configuration, it would've come as 4 2GB DIMMs. Anyways...without doing anything else first...I just had to take a peek inside.

Now, I don't know if it was that I got a Core i7-860 Dell computer at work (replacing a P4-2.8Ghz machine, so slower than TARDIS - a P4-3.2GHz w/HT machine) or ordering this computer...but TARDIS had seemed to get slower and slower, to pretty much insufferable these last few days. Still not ready to turn new system on....more later.

Pages: 1· 2· 3· 4· 5· 6

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 20 years 2 months 1 day 14 minutes and 52 seconds until the end of time.
And, it has been 4 years 10 months 27 days 13 hours 48 minutes and 4 seconds since The Doctor saved us all from the end of the World!

Search

November 2017
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
    1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30      
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 1
This seal is issued to lawrencechen.net by StopTheHacker Inc.
multiblog engine

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime