Tags: network

01/19/14

  04:22:00 pm, by The Dreamer   , 2307 words  
Categories: Networking, FreeBSD, Printers

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

So, near the end of July, I started investigating (once again) on replacing my HP Photosmart 8450xi (which was now over 8 years old....bought it on June 30th, 2005 - Back from Vacation Tech Buying Spree?...setup on July 9th, 2005 - link

I had started looking some time before this, but was put off for a bit due to my experiences with the Brother DCP-7065DN -- link, since it seemed most of the choices out there were GDI and I'm moving to more and more heavily FreeBSD as my primary operating system.

Especially since it appears that 'box' finally called it quits on December 2nd, before I had started my journey home from Chicago TARDIS that day....and orac is inching close to its end, as the pair of ST2000DL003's which evidently only had 1 year warranties from June/September 2012 started going shortly into the new year. I was trying to use ddrescue to force sector remapping on the first drive, when the other drive has decided to vanish permanently. I had thought it was was DM's that had 1 year and DL's that had 5 years, perhaps I had it backwards....or its a question of when I purchased them, or how they were packaged.

Checking my order history, I purchased one drive on June as a bare drive and later in September as a retail kit. I haven't yet pulled the drives, so I can't look up the serial number for the vanished one, but Seagate's website says the one that is responding is out of warranty. Even if the other drive is still under warranty, not sure I want to deal with getting it exchanged for a refurb to create a solo 2TB drive. Can't think of not wanting raid given what I'll likely use it for. And, not sure I'd buy a different 2TB drive to be its mate (and it won't work with my other 2TB arrays, since its an advanced format 2TB drive...while the lraidz2 pool on zen used legacy format 2TB drives (which limits options of growing it non-destructively.)

Fortunately, I had copied one of the big volumes from it over to zen (along they way it got corrupted, so had been trying to copy it back from zen when the other drive died). And, files of the other volume (my pyTiVo store) should all be in backup, where I don't have space on zen to restore them yet.... I have pyTiVo on zen, but the content under it is different...and larger, so much that it is currently not being backed up. I haven't gotten made much progress on building the second backup server....guess I'll need to look at this sooner than later.

And, now it seems the other 2TB RAID-1 array on orac is dying. I just went ahead and failed the drive that was giving it issues. Not sure what to do with it...suppose I could try ddrescue on it and see what happens. The big volume on it had also been copied over to zen, so guess I'll update my HSTi's to point to zen instead of orac for their content. Another used to be for Time Machine backups, but I had moved that over to zen when I set up the new work laptop to do Time Machine backups on my home network. I was using that space as overflow from pyTiVo. And, another was for backups of various things, which I had stopped adding to as new backups are going to zen now. Its things like regular backups of my websites at dreamhost and 1and1, my router configs, serial console servers, and some other backups. I was also replicating some directories on zen to orac as backup (left over from when zen was a Windows 7 PC....which saved me from losing everything when it scrambled itself.)

But, back to my printer quest.

Full story »

03/31/12

  03:27:00 pm, by The Dreamer   , 1112 words  
Categories: Software, Computer, Networking, Ubuntu, Windows, Printers, Scanner

I got a Brother DCP-7065DN

In a rather impulsive move, I bought a Brother DCP7065DN Monochrome Laser Multi-Function Copier via an Amazon Lightning Deal!

I had been considering getting a new laser printer for a very long time. I had ditched my old Brother HL-630 laser printer about a dozen years ago. This was a crappy printer from the start...with its grey background problem that they never seemed to resolve. Had gotten it from Future Shop of years way gone by....where it had been a special buy for them...so they were selling them really cheap. Kind of like the Canon BJ-5e bubble jet printer I had gotten before.... (It was a BJ-10e, but made cheaper just for them. And, used a special ink cartridge not used by any other model from Canon...at the time. Otherwise, I often wish I still had it....though when I moved from Canada to the US, it became kind of a problem to get ink for.)

So, after the Brother HL-630 was scrapped....I spent a long time thinking about my next laser printer....I was heavily leaning towards getting an HP Laser printer....so it was going to likely take a very long time before I would make a move. And, then I started to lean towards getting a Color Laser Printer.....and then I wanted built-in Duplex. And, having been spoiled by the HP Photosmart 8450xi, it also needed network capability....

There was an HP Color Laser printer that seemed to fit the bill, and it was popping up on sale now and then. But, then I upgraded to Windows 7...and found that not only is my old Photosmart 8450xi no longer fully supported in Windows 7, neither is the HP Color Laser printer that I had been considering.

So, that nixed wanting to jump on it the next time it went on sale. (Sale as in cheaper than it would cost to buy 4 new toner cartridges for it.)

So, the search continued....I started looking at Brother again....in current models, something like the HL-4150CDN or the HL-4570CDWT.... but, then I was introduced to a multifunction printer. Which actually was kind of useful. Being able to scan a document onto a USB drive. And, there's always the once a year or so occasion, where somebody wants me to fax something. I used to have a fax machine...first a dedicated thermal fax type thing, and later a refurbished HP OfficeJet v40xi. A power surge took out my first fax machine...and then a few years later...living in the same apartment still....a power surge took out the HP OfficeJet....

So, I then started to consider printers like the Brother MFC-9560CDW....plus the idea of color copying seemed useful, especially duplex color copying.

Of course, now its getting expensive to start and expensive to keep....

I also had this issue of printing envelopes....a capability I had lost when I upgraded to Windows 7. The Dymo Labelwriter that I had gotten from stamps.com didn't work on Windows 7. And, I didn't really want to buy a new Dymo Labelwriter to keep this capability. Eventually I canceled stamps.com, though still have the occasional postage need....which it would be nice if I could still print postage, etc. Think there are cheaper ways than stamps.com, but probably not from Linux.

But, then last December while visiting my parents...my dad snapped up a Brother HL-2270DW, and this was a pretty decent little printer. It was on sale for the holidays...but it does PCL emulation. I wish I had just gotten one of these for myself then, too.

Instead, I started to reconsider whether I really needed color laser. Around year end...there were things I needed scanned or copied, for things like taxes and FSA...so I was still was still leaning towards getting a multifunction printer of some sort. And, I kind of fell for the Samsung SCX-47xxFN, and then later the Samsung SCX-4828FN (about $400). The 4828FN adding Postscript emulation. I've always wanted a postscript printer....

Though these are still expensive printers. These ones had fax....and I did have to need to send a fax once this year, so far. If I were to leave out fax, it should've been something like the Brother DCP-8085DN (about $350)....which would've had duplex copying, and both PCL and PS emulations.

But, instead the Brother DCP-7065DN showed up as an Amazon Lightning deal for $80 (50% off)....I did a quick google search to see if it work on Linux, and some sites seemed to say it had PCL and PS as well. And, bought it.

Well...apparently its common in the industry to make similar internals/firmware across their product line with different features available or not, etc. And, Brother didn't even bother to remove PCL and PS from the capabilities page that the printer spits out or not advertise the LPD queues for these modes in its network info. But, trying to use the queues is like sending to /dev/null. This particular printer is only GDI (so in someways worse than the HL-2270DW ... currently about $120. And, then there's an HL-2280DW for about $10 more, and adds a scanner....a network scanner would be useful. Though a standalone scanner would be more useful during my situation where my primary desktop is dead.

But, I was able to get the DCP-7065DN working from my Ubuntu server, after following some websites on the subject. Namely..the detail that they only provided 32-bit deb's, and I have a 64-bit Ubuntu Server. I haven't tried the scanning feature, since the printer sits by TARDIS...and I have my Fujitsu ScanSnap S300M working on my Ubuntu server....though not sure if I've gotten the two-sided scanning part to work. So far the bills that I've needed to scan for FSA reimbursement have been one-sided.

But, the DCP-7065DN doesn't have a duplex ADF...so it doesn't provide an alternative. And, my other scanner is a Fujitsu ScanSnap S300! (I bought the Mac only S300M on a Black Friday sale, and back when I used to bring work macbook pro home now and then. Later I got the S300, when I had more FSA money to spend and wanting faster turn around...but wasn't bring the macbook pro home anymore.) A regular flatbed scanner has been on my wishlist...perhaps the DCP-7065DN will satisfy that need. Something to probably check out after I get around to finally upgrading TARDIS.

So, while it was a problem to find that the DCP-7065DN is only a GDI printer...it does currently work from Ubuntu...and sharing it out from my Ubuntu server is interesting. There's no native DCP-7065DN driver in Windows XP, but I just pick some Postscript printer driver...and that worked. And, it looks pretty good (compared to the early days of ghostscript...)

What what I'll do when I finally get around to rebuilding my Windows 7 desktop????

11/10/11

  07:58:05 pm, by The Dreamer   , 3536 words  
Categories: Travel, Healthcare

I went to a Narcolepsy Network Conference in Las Vegas #NN2011

I was in Las Vegas, NV for the 26th Annual Patient Narcolepsy Network Conference from October 13-16, 2011 at the Stratosphere.

This is my second Narcolepsy Network conference. My first was the 25th Annual one in Arlington, VA (actually the Hyatt in Crystal City, VA)....

What led me to my first NN Conference was kind of strange. In early 2010, I first heard the N word raised in relation to my continuing EDS problem after successful/compliant management of my Sleep Apnea using CPAP (AHI was less than 1.0....closer to 0.0. In fact it was 0.0 in a PSG I had in December 2010, so sleep doc lowered my pressure so that its around 1.5 now.)

I honestly didn't really know a whole lot about Narcolepsy then, so I started researching it online. Since, I was a regular on the TalkAboutSleep message boards, and attended the Sleep Apnea chats regularly too....I started showing up to the Narcolepsy/Idiopathic Hypersomnia/Fibro chats as well.

From the chats, I feel like I've gotten to know Tracy and some of the other moderators. And, Tracy suggested a few times in chats that I check out Narcolepsy Network and its upcoming conference. With the implication that we would finally get to meet face to face if I went to the 25th one.

So, that's why I joined Narcolepsy Network and then went to the 25th Conference in 2010. Somewhere after I was committed to going, namely I had purchased my non-refundable coach airplane ticket. Tracy started saying she might not show up, and eventually it became a definite. But, she would be on for regular Thursday night N/IH/F chat....so I could do that the night before the conference from the hotel. During the chat I met Ann Austin....

At this point, I wasn't sure there was going to be any future NN Conferences for me. Since they seem to usually be second weekend in October...and doesn't line up too well with other conference/convention activities that I want to do this time of year (namely the Ohio Linux Fest...which is usually in mid-ish September, though the year I last went it was on the Columbus Day weekend....and some day I want to go again. And, Chicago TARDIS....Thanksgiving Day weekend. I actually wasn't planning to go this year [2011], but decided that I would when Alex Kingston was going to be there....she's not now, but Fifth Doctor Fest makes it still seem ok....though its missing one companion that I associate with 5, though Tony Lee kept saying at last year's Chicago TARDIS "Adric is dead"... :`( )

Pages: 1· 2· 3· 4· 5· 6· 7

10/28/09

  01:44:03 pm, by The Dreamer   , 283 words  
Categories: Stuff, Home Theatre, Hardware, Software, Computer, Networking, TiVo HD / Premiere / Elite

Yet another PowerSource 400

Wonder if the people at Xantrex or Amazon.com are wondering what's with all the PowerSource 400s I've been buying?

The latest acquisition brings the total to 5. With the latest being the 3rd unit in one room.

Somewhere in a past shuffle/outage...I had lost a UPS (CPS700AVR), and lost a computer (box). I had rebuilt box, and as interim....put it on the PowerSource 400 that was backing up 'lhaven'. I also put the 8-port [end] switch and my wireless access point onto this PowerSource 400.

This cuts into the available runtime, and its important to me that 'lhaven' never go down. Though its also important from the operation of my home network that 'box' never goes down. And, of course, the switch...and maybe the wireless access point. Though other parts of my home network are on different PowerSource 400's. The stack of equipment at the DSL point is on one, and the stack of equipment at the Cablemodem point on another (though it also includes extra things like 2 TiVo HD's and Expanders and other HT equipment)

So, I have moved 'box' and the network equipment here to the new PowerSource 400....leaving 'lhaven' on its own.

Now the question is whether or not there'll be another 1 in the future....for 'orac'.

Pages: 1· 2

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 20 years 5 months 23 hours 2 minutes and 32 seconds until the end of time.
And, it has been 4 years 7 months 27 days 15 hours and 24 seconds since The Doctor saved us all from the end of the World!

Search

August 2017
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
  1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31      
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 1
This seal is issued to lawrencechen.net by StopTheHacker Inc.
powered by b2evolution

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime