Tags: pro

01/19/14

  04:22:00 pm, by The Dreamer   , 2307 words  
Categories: Networking, FreeBSD, Printers

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

So, near the end of July, I started investigating (once again) on replacing my HP Photosmart 8450xi (which was now over 8 years old....bought it on June 30th, 2005 - Back from Vacation Tech Buying Spree?...setup on July 9th, 2005 - link

I had started looking some time before this, but was put off for a bit due to my experiences with the Brother DCP-7065DN -- link, since it seemed most of the choices out there were GDI and I'm moving to more and more heavily FreeBSD as my primary operating system.

Especially since it appears that 'box' finally called it quits on December 2nd, before I had started my journey home from Chicago TARDIS that day....and orac is inching close to its end, as the pair of ST2000DL003's which evidently only had 1 year warranties from June/September 2012 started going shortly into the new year. I was trying to use ddrescue to force sector remapping on the first drive, when the other drive has decided to vanish permanently. I had thought it was was DM's that had 1 year and DL's that had 5 years, perhaps I had it backwards....or its a question of when I purchased them, or how they were packaged.

Checking my order history, I purchased one drive on June as a bare drive and later in September as a retail kit. I haven't yet pulled the drives, so I can't look up the serial number for the vanished one, but Seagate's website says the one that is responding is out of warranty. Even if the other drive is still under warranty, not sure I want to deal with getting it exchanged for a refurb to create a solo 2TB drive. Can't think of not wanting raid given what I'll likely use it for. And, not sure I'd buy a different 2TB drive to be its mate (and it won't work with my other 2TB arrays, since its an advanced format 2TB drive...while the lraidz2 pool on zen used legacy format 2TB drives (which limits options of growing it non-destructively.)

Fortunately, I had copied one of the big volumes from it over to zen (along they way it got corrupted, so had been trying to copy it back from zen when the other drive died). And, files of the other volume (my pyTiVo store) should all be in backup, where I don't have space on zen to restore them yet.... I have pyTiVo on zen, but the content under it is different...and larger, so much that it is currently not being backed up. I haven't gotten made much progress on building the second backup server....guess I'll need to look at this sooner than later.

And, now it seems the other 2TB RAID-1 array on orac is dying. I just went ahead and failed the drive that was giving it issues. Not sure what to do with it...suppose I could try ddrescue on it and see what happens. The big volume on it had also been copied over to zen, so guess I'll update my HSTi's to point to zen instead of orac for their content. Another used to be for Time Machine backups, but I had moved that over to zen when I set up the new work laptop to do Time Machine backups on my home network. I was using that space as overflow from pyTiVo. And, another was for backups of various things, which I had stopped adding to as new backups are going to zen now. Its things like regular backups of my websites at dreamhost and 1and1, my router configs, serial console servers, and some other backups. I was also replicating some directories on zen to orac as backup (left over from when zen was a Windows 7 PC....which saved me from losing everything when it scrambled itself.)

But, back to my printer quest.

Full story »

11/23/11

  06:05:00 pm, by The Dreamer   , 633 words  
Categories: Hardware, Computer, Travel, Healthcare, Printers

First 'download' from new IntelliPAP

So, I'm about to go off for a trip...and therefore take a little break from my IntelliPAP AutoCPAP machine.... )-o

U-(

&#59;D ....and go back to use my old M-Series Pro CPAP machine.

Anyhoo....a while back I had picked up a 'new' laptop computer

Well, the purpose of that computer was primarily intended to easily record smart codes from the readout of the IntelliPAP AutoCPAP, enter them on the intellipap website and generate my latestly report. But, the laptop is currently spending most of its time competing with my other laptop in the living room. But, I did recently pick up a Thermaltake Toughpower Ultra Slim 95 Watts Universal Laptop Power Adapter High-Efficiency USB Charging Port using Amazon Prime....to be part of a rush shipment of goods that I wanted before going to Chicago TARDIS. Except that I'm sticking with my old laptop for travel, and the reason I wanted a new/different laptop power adapter...was that the Compaq 6910p's adapter uses a 3-wire AC cord...and there isn't one easily available near my bed. So, buying a new power adapter that uses a 2-wire cord seemed the way to go. Though there are cheaper, slower shipping ones available.

And, wouldn't you know it...I was on that sight buying a pre-Black Friday/Cyber Monday special and forgot to get the power adapter I had looked at earlier as part of the order. And, now I probably can't...because the adapter alone isn't enough to get free shipping. But, what I did get is getting free shipping....and it would've be nicer to have it with it. Maybe later...

Though I remember why the logic broke....the other power adapter I was looking at, would've been more suited for permanent use in my bedroom (green features) and the Thermaltake more useful when traveling (can never have enough USB charge ports in a hotel room...) So, not sure what I'm doing now....should really finish packing. Took today off to do that, and I haven't started yet. :oops:

Pages: 1· 2

10/30/11

  06:01:42 pm, by The Dreamer   , 349 words  
Categories: Healthcare

My new CPAP, and final download from the old?

Today I finally got around to setting up my new Intellipap AutoAdjust Travel CPAP Machine with SmartFlex.

Not much to write about setting it up...except that I couldn't find the power cord for it, so I just moved the cord from my old CPAP over to it...saves me digging around behind my headboard anyways. And, there was some question of where on top of my night stand to put it, and how to orient it. Even though I bought it with its integrated humidifier, I opted to not use it...on my current night stand set up (perhaps when I get around to buying the new one...and/or I become more comfortable with the unit...I'll position it such that it'll be easier to slide the tank in and out.) In the meantime, I'll just stick to my HC150 external humidifier.

The only annoyance I found, was that the online DME didn't include the clinician manual with it, and didn't set it up to my prescription. My (current) prescription is 7.0 cmH20. They noted that they had set it to Auto 4.0-20.0 cmH2O....but, they had gone into the menus, because the factory defaults are auto 5.0-15.0 cmH2O....

I did a quick test fit, was surprised to find air blowing already, and it was so quiet. I knew I had enabled auto-on, but didn't expect it to come on so quickly and silently...compared to old Respironics machine. The auto-off was a little more annoying, but I guess that's expected. Wonder what I should set Tubing Length to....choices are 6' or 10'. I'm using a 6' tube, but there's a 2' tube between the machine and the humidifier...and there's also an extra bit of tube (with a quick connector) from the end of the 6' hose to the mask elbow. Guess I'll go with the 10' setting. I suppose I could dig out my cmH2O gauge manometer to verify its pressure.

But, looking forward to first night on it....

Pages: 1· 2· 3

Now instead of subjecting some poor random forum to a long rambling thought, I will try to consolidate those things into this blog where they can be more easily ignored profess to be collected thoughts from my mind.

Latest Poopli Updaters -- http://lkc.me/poop

bloglovin

There are 20 years 6 months 22 days 8 hours 45 minutes and 6 seconds until the end of time.
And, it has been 4 years 6 months 5 days 5 hours 17 minutes and 50 seconds since The Doctor saved us all from the end of the World!

Search

June 2017
Mon Tue Wed Thu Fri Sat Sun
 << <   > >>
      1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30    
Google

Linkblog

  XML Feeds

Who's Online?

  • Guest Users: 0
This seal is issued to lawrencechen.net by StopTheHacker Inc.
multiple blogs

hosted by
Green Web Hosting! This site hosted by DreamHost.

monitored by
Monitored by eXternalTest
SiteUptime Web Site Monitoring Service
website uptime