So, when I got up this morning...the plan was to fully wake up and go down to the UPS store hopefully before it gets too hot.
But, I started in on various things for random reasons.... I was filling out some paperwork for an appointment I have on Monday. And, while I was doing that, I thought that now might be a good time to finally move my HP Photosmart 8450xi from by TARDIS to the new All-In-One Cart I had gotten from Staples. I had worked out yesterday where it was going to sit....but first I moved the TR5M-BP to a spot on the cart. Decided to go with the bottom shelf. Not sure why, but I moved it live. And, then I went to move my printer. After that was done, it occurred to me there was a CD that I wanted to burn, so I went to get a CD-R...and noticed that the DVD+R cakebox didn't have any labeling on it, and occurred that once I open the CD-R cakebox...it would also have no label. The discs don't have any marking on the fronts...though the color of the dye on the data side would be one way to tell them apart. But, I had just bought a Brother P-Touch PT-1090 Label Maker, so it was time to open it up and use it.
Noticed a tear strip on the pack, so it would be easy to open...I took it to the bedroom to work on it.
I had the bed stripped for laundry (mainly because I had gotten years of disgusting dust all over it from doing ReplayTV surgery on it.) When, I thought that while I have it this far apart, I should finally replace the bedframe. Old bedframe is over 25 years old....had noticed when I moved the bed a couple years ago that one of the rollers on the frame was broken....I had made a note that should I find a new bedframe via Amazon Prime. And, some time ago I did....a year ago, on July 31, 2010.
A pretty nice frame...and I made the switch and got all that done. Noticed that the Select Comfort controller was only showing a few segments....missing so much that its useless. Wonder how I'm going to get it to the right pressure tonight? It had been losing segments for a while...but I guess I intended to look for doing something about it...but don't know why I put if off so long. I suppose deep down, I had reached my limit on getting Select Comfort to get it right.
But, I had worked up a sweat fiddling with the bed base....I had taken the cover off to get it to fit the new frame, and the plates had shifted. And, it took some work to get them flush again. So, I went off to shower, and then thought I should see about heading out...but I got laundry going, so I should get to a suitable spot first. So, what will I do next?
And, it will be....but first I decided that I should get at the clutter of new stuff that I hadn't gotten around to yet.
First up was a Sans Digital MS2T+B MobileSTOR enclosure I had picked up a while back. The current array that backuppc goes to on orac is filling up. It's just a 4TB filesystem on a RAID6 array using 1.5TB drives. There's one other filesystem on this array and it could use some more room as well. I have debated whether the array needs to be RAID6 for backuppc, or whether RAID5 would be sufficient. But its the other filesystem that is driving RAID6, though I wonder if RAID 0+1 might be better for that (or just RAID1, since it is currently small enough). But, I'm using a pair of 5 bay PM enclosures....and older RAID 1 in one, and the RAID6 array in the other.
So, I've decided that I'll likely look at getting 5 2TB drives and doing RAID5 for a backuppc only array....keep the current 5 1.5TB drives in RAID6 for the other filesystem and whatever else I might want to move over to it. But, the stuff on the current 1TB RAID 1 array should just stay put. Well, there are two (of 4) regular eSATA ports on the back of orac that aren't being used yet. So, that's where the 1TB RAID 1 array will go.
It is still a ways off before I take the plunge and actually build the new array (though the backuppc filesystem has filled up twice since I thought up this scheme)... though prices are dropping and I do have a tax refund coming that many other things I want to use it on (including a travel/backup cpap setup, which is about the entire refund...oops).
But, I decided I would set it up, because I saw 2TB Hitachi drives the other day for cheap (they did recently get acquired by Western Digital, so sellers might be clearing out the Hitachi branded drives?) So, it might fall into range of what would be an acceptable single month discretionary purchase. Though technically, I've already done this month's when I bought the Nanosat speaker package that was a NewEgg shell shocker....though I used BillMeLater. I've been wanting to get this set to upgrade the odd ball collection of old speakers that is my current setup. But, the shellshocker price put it just into the range.... But, I was considering Seagate drives...which then dropped to remain cheaper than Hitachi....Hmm....
Anyways...I went to put the new enclosure into service, but I couldn't find the pair of eSATA cables I thought I had set aside for this. I did buy a pair of eSATA cables last fall from Amazon.com. But, evidently I used them for something else. I'd guess when I moved orac, I needed the length...not sure where the old cables went to then, but the probably aren't long enough for this. So, did some quick eBay purchases...and maybe I'll get to this eventually....
The old chair that I used in front of my main computer is like 25 years old. It has been on my list for a long time to replace it, but what I really want and what I can justify shelling out at a given moment were in collision. What I've wanted is an Aeron chair, fully loaded, etc. But, that is significantly more than the 'max' of the threshold in my mind where I can get something on a given month to where it requires budgeting, planning and justification, etc.
But, recently I got the Staples Desley Mesh Task Chair, Gray...which I found to be really nice compared to my old chair. In fact, because I was spending a lot more time on my main computer than usual...migrating and configuring a new computer and later the weather had me working from home a lot. I switched the chairs. The lack of arm rests was kind of odd, but the padding being all worn out in the old chair...it was nice, it also meant that I needed to step up my plans to replace the old chair and finally get a better chair to go in front of my main computer.
Given that I often dress differently at home than I do at work, I started thinking that maybe a mesh seat isn't what I'm really needing for home use anyways. Plus the work chair seems to trap food dust in its mesh so easily and annoyingly so.... So, expanded my search to other mesh back chairs I had settled on what I thought would be the chair to get that was closer in line to what I could justify buying one month. Just had to find a month where I didn't already have plans to acquire some other similar costing item.
Meanwhile, I was continuing to check out staples for other reasons, and for the possibility of getting another Mesh Task Chair. The other computer area has a kneeling chair that isn't really something I want to spend a lot of time on, but is adequate there...but its also falling apart...and using cable ties to fix it is only going to keep it usable for so long. And, since I really liked the Mesh Task Chair...it seems like the thing to get for here too.
Anyways, on one of the visits, I saw they were having a chair sale one week. They had like $100, $50 or $30 off various chairs. And, there were some possible mesh back chairs in the $100 or $50 off mark. I settled on one that was $50 off, because it was more adjustable. Though a $100 off one that I was considering actually did appear to have a mesh seat. But, then I got a preview of next week's flyer...and the chair that was $50 off would be $70 off. So I waited and ordered it then. Delivery worked out, because I ended up being at home 4 days that week (first two work was closed, second to I got to work from home). The delivery of the chair was not delayed due to weather, though I had other deliveries that were.
Now, I probably should've measured things before I went for it. Because the seat all the way down is a touch higher than my old chair, and the arm rests stick forward more. So, it bumps into my old keyboard tray....
Which brings me to....
Pages: 1· 2
As so often with any new technology purchase I make, there is a lot of scope creep...where I end up buying lots of other things associated with the purchase. Sometimes a bunch of these things come into the process before I even get around to the actual piece of technology.
This is one of those times. I still haven't gotten to the new computer, and I'm buying stuff due to it.
Since the Staples Desley Mesh Task Chair had gone so well, and the printer stand seemed so inadequate in the space (and ill suited for the task of being stand for old computer), I took a quick peek at Staples.com to see if there was an inexpensive desk that would fit the space and fit the bill. I had bought the chair last week, during last week's Weekly Ad sales....well, this week in the Weekly Ad was a sale on the Staples Cormac Computer Cart for $29.99 ($40 off).
After some measurements and having freed up extra space...it seemed like it would be a good fit and I went for it. Timing it so the delivery would happen today (Wednesday)...thinking that I would be home to receive it after a doctor office visit and before heading into work. Well, UPS was running slow today....it happens, especially this time of year, I guess. So, after waiting a little bit longer than intended, I headed in. I figured I could stick a note tomorrow for it to get left if it didn't get left. Its a 40lb box...it should be safe by my front door for a few hours, despite recent news of people stealing UPS packages...even following UPS drivers and signing for other people's packages.
Well, it got left, along with a few other packages....the box that the chair mat that I had ordered to get the order over the $50 for free delivery threshold. I didn't really think a chair mat would work in the space and I didn't need another one, but I couldn't find anything else on staples.com that struck me as something that was immediately available and could fill a need.
After settling in at home, I set out to assemble the desk. The only thing not included that it needed as a philips head screwdriver....it all went together quite well. And, of reasonable quality...given its price, etc. The mesh was dinged in some places, but only noticeable up close. And, the removable shelf came with two same side brackets, even though the instructions showed a left and a right. The parts list gave no indication that there should be a difference, as it was two part K's (unlike the sides of the keyboard shelf glides which was clearly a part L and a part M....conveniently part L was the left side) The problem with both part K's being the same is that the shelf only looks 'good' if used on the right side of the cart. In my current arrangement, I have it on the left side (since right side is into the corner of the room...) Though that may change as I position my computer in...since in normal setup, I have the computer to my right, and might move the desk away from the corner enough for it to tuck in on that side.
In the current arrangement, the new chair mat doesn't fit into the space. It would if it was just the printer stand (which turned 90 degrees compared to computer desk, but not an L arrangement...the space is a cramped rectangle). I probably should've measured the the space to see if the chair mat would fit.
Perhaps I'll get it to fit when I get around to the reorg project of the other bedroom/storeroom/computerroom....
Pages: 1· 2
This is an update to "UPS Hell", where it now involves both kinds of UPS.
I mentioned that I first looked at free shipping by Amazon.com to get me the UPS, they were estimating that I would get it on Wednesday (Feb 25)....and that seemed too far away to get a UPS sent to me. So, I turned to Staples.com. And, they had some UPSs that could be shipping in (as few as) 1 Business Day. The first one I picked projected an estimated delivery of Feb 23, so I went with my second choice which had a delivery date of Friday (Feb 20).
Well, eventually order status reported that the order would be coming by UPS with an expected delivery date of Friday (Feb 20). I waited for UPS to show up, and he did...but no UPS among his deliveries that day. But, the tracking showed it was out for delivery on the 20th.
I then waited this morning (Monday - Feb 23) for UPS to show up, and he did....but still no UPS among his deliveries. UPS tracking still shows the "Out For Delivery" status at 7:26am of Feb 20th. I called UPS and Staples trying to find out where my UPS was. Finally sent of an email to Staples. Eventually that resulted in a message being left for me saying that if I didn't get it by 5pm, to give them another call.
I came home, and no sign of attempted delivery and no update in UPS tracking, etc. So, I called Staples. They said there was a note on my order that if I hadn't received order by 3pm that they would resend the order.
Eventually, I decided to have them go ahead and do this. Now my new estimated delivery of the UPS is between 9 and 10am on Wednesday (Feb 25).
Hmmm, so much for being in a hurry for the new UPS, I guess.
Though this just annoys me that much more...since Amazon.com would've been for an APC BR1500LCD, while I ordered a CyberPower CP1285AVRLCD from Staples.com based on the expectation that I would have it before last weekend. My first choice from Staples.com for an APC BX1300LCD.
Today, I came home and found my Staples delivery waiting by my front door. It was the APC Back-UPS ES Series 550VA UPS (BE550R), along with 3 cases of water (which I had added to pad the order to be over $50).
But, when I came in...things were strangely quiet, or rather I was hearing sounds that I wasn't accustom to hearing. My main computer wasn't on....its UPS, a Belkin F6C1500-TW-RK, was off with a red light. Strange.... I wouldn't expect this UPS to be down. Sure its out of warranty now, but I had replaced its battery back in August.
I restarted the UPS and waited for everything to be working again, etc. And, then I triggered a 10-second self-test. Wham....it went down instantly. Guess the UPS is bad and needs to be replaced.
Of course, now the President's Day sale is over....and that 1500VA UPS that I was on the fence on getting....that was $30 off and free shipping. Wasn't on sale now. So, I went looking around on line to see what UPS I could get quickly, of sufficient VA's. The load meter on the Belkin is around 33%, so the replacement I got didn't have to be the full 1500VAs. Though it was still preferable.
At first I looked at Amazon.com, but Amazon Prime was only going to get me free ground shipping on the UPS. And, they put ETA at Feb 25th. I didn't really want to wait that long....so it occurred to me that I should check Staples again.
Amazon.com had a 1500VA UPS for under $200, while with Staples I would be looking at 1285/1300 VA UPS for under $200. And, while the Amazon.com one would be APC, and the Staples would be CyberPower. I opted to get a 1285VA Cyberpower from Staples, since they said I could get it on February 20th.
And, just as I was about to finalize the order, I remembered that I had a $10 off >$100 coupon that I looked at using on Monday...but didn't think of what I had that much to use it on....but now I did. So, now I'm waiting for a Cyberpower 1285VA UPS to appear.
Haven't decided when I'll put the 550VA UPS into service. The thing I want to put on it, isn't in place yet and I don't feel like dealing with that right now.
I guess I forgot that a big sales event was coming up....but, I happened to look at Sears and that air purifier that I wanted was on sale. The idea for another air purifier shuffle is forming.
But, then I was thinking of a UPS to filter out the small power glitches....and once again, sales this weekend. I first went to best buy, to find a cheap UPS...and saw that the 1500VA Geek Squad UPS was on sale. So, I started trying to map where that UPS would go, and it it free up a small UPS. Then somebody mentioned that Staples featured a small UPS for cheaper and better than the the one I was looking at from Best Buy.
So, after some though, I decided to go with that UPS (APC 550VA BE550R)...$20 off for $40 before $10 rebate. Decided to pad the order with 3 cases of bottled water to get free shipping.
The Sears EnviroSense Air Purifier has the problem in that it defaults to off after the slightest power interruption. While the Surround Air that I recently got, seems to have no such hangups.
So a small UPS to keep the EnviroSense Air Purifier happy seemed the fix to that. Though not sure I want the noise of UPS in the bedroom. Of course, the laundry right by the bedroom door...so it isn't really a big fix. Nobody said I had thought this through extensively. But, I do plan to get a big UPS eventually, and it'll be a refurbed SmartUPS to back up the other half of HT setup. But, I guess that will have to wait to later in the year.
Though I suppose what I could do for it being a small cheap UPS...is remove the noise maker.
Latest Poopli Updaters -- http://lkc.me/poop
|<< <||> >>|
ups ebay amazon.com «chicago tardis» «watch instantly» voip replaytv «instant streaming» «doctor who» usb backuppc tv woot mdadm cfengine3 boinc linux tardis raid1 upgrade 10.04lts «air purifier» «powersource 400» «hd movie» eyeglasses b2evolution netflix cox «windows xp» virtualbox tivo raid «amazon prime» appletv box progressive freebsd cpap «tivo hd» ubuntu «tivo premiere» zen dsl twitter prescription «windows 7» lhaven «sans digital» orac dvd