Back on November 25h, 2013: I started writing this post:
According to this blog, I received this PowerSource 400 on January 21st, 2008 - click here
In answer to the question at the end of that post, the answer was yes. There are 5 other PowerSource 400's in service in my home.
Anyways...back on October 28th (my 45th birthday ), about an hour after getting into bed there was a power blink....I recall being woken by the PowerSource 400 in the bedroom, but I was still able to breath, so I eventually went back to sleep. I woke in the morning to find that half my network had been down for quite some time, though I didn't see any alerts on the security system control pad.
This being the "network closet" UPS...it was providing backup power for my DSL modem, its associated router, the switch that connects the various rooms in my home together, namely the "living room" and the "back bedroom". Not sure which AP the "side bedroom" was connected to. Though the power outage knocked out my laser printer, which I haven't felt the urge to find out why. Really need to work on finding a more accessible location for it, or work on reversing the entropy in my nuclear room(s)... especially since my other printer is circling the drain, and not sure when I'll get around to getting the new inkjet printer that I've been eyeing.
Restarting the UPS, was when I finally got alerts from my security system. It was a combination of events that happened when I cycled power and events that had been waiting for the return of connectivity. The security system's primary connection is broadband, but it also has a phone line for backup (there's a cellular option, but its been out of stock whenever I've felt the urge to splurge for it....though I kind of have cellular backup anyways....)
It was the return of power that caused it to report loss and recovery of the phone line, along with the queued messages of broadband and power outages, with restores of all... Its built in backup battery had kept it up during the outage (approx 8.5 hours). The phone line from the base station is connected to an ObiHai OBi110. Which has an FXO port to allow selection of analog phone service, or in the event an outage pass through to this. In normal operation the OBi110 is making my Google Voice available to my regular phones, where the OBI110 is configured to use my other Internet gateway. The FXO port is connected to a Cobra PhoneLynx Bluetooth Cell to Home Phone Adapter which is associated with a phone with AT&T prepaid service.
Though I plan to at a later date replace both the OBi110 and PhoneLynx and cellphone with an At&t Wireless Home Phone Base. Which I have sitting, waiting for when I get around to it.
The plan is the OBi110 will move to the living room for use there, though its in associating with the planned inkjet printer replacement.
So, its time to replace the batteries...guess I'll do research on where I can get a pair. Hmmm, it uses the same kind as the pair I had replaced in my SmartUPS 1400 back on October 10th (it went around October 5th, and I ordered them on the 6th). The site provides discounts if you buy multiples. I got 5% off for getting 2, would've gotten 7% off for getting 4, or 8% off for getting 6 (9% for 8 and 10% for 10+).
I hesitate, since I'm waiting to see how the recent problem with BillMeLater goes...so needs to be sometime after Nov 5th to order. Meanwhile a storm comes in on November 3rd, and power is blinking like crazy...and I'm constantly restarting the PowerSource 400. Finally I take it out of service, and everything is just in a regular surge strip. Things remain stable (dbox stayed up straight) until this morning. But, feel that I need to put the PowerSource 400 back into service before my annual Thanksgiving trip.
After much procrastination, and lots of searching. I settle on ordering 4 such batteries from an eBay seller on November 14th. Plan to replace the batteries in my second PowerSource 400 soon, since it was purchased on December 31st, 2008 and provides backup power for my CPAP. (see here).
And finally, this morning, I decided that I've put it off too long and to replace it this morning.
Which was a challenge....
There was supposed to be a page 3, but all I had typed was the page break...so had to figure out how to open it up again. Aside from the 4 corner screws, I remembered that there's a screw behind the sticker in the middle. But, I forgot the rivets in the bottom, and that both parts need to be extracted.
Once opened, I started to disconnect the batteries, and once again threw sparks and added another mark to my screwdriver. Taking a step back, I decided there's an order of operation involved here. The answer is start with the outside connections, and then the inside ones. And, then reverse it. This time I knew the side panels interlock with the batteries to help lock them into place, so made sure the wires were clear, I noted that the neural wire for the front outlet had a kink, I made sure that all the wires were in the channel while buttoning things back up.
Surrounding this, was the challenge of getting it out from behind my headboard, though while I was down there, I found a couple missing packages of mask diffusers, I knew I wasn't using them up that quickly, but couldn't figure out why I kept running out. There was one Xyrem pill bottle, I had one night knocked both down...luckily while the empty (first dose) one went all the way down, the other was just wedged between mattress and headboard in upright position. Since I use bottles longer than a month, I usually go by how grungy the caps get...since I customize the bottles, so I can tell the two apart by touch, which matters when one has a larger dose than the other....and the caps get grunge depending on how many nights I overfill (have always had a problem measuring drinks that way.... ) Or how often they get tipped...
Pages: 1· 2
Wonder if the people at Xantrex or Amazon.com are wondering what's with all the PowerSource 400s I've been buying?
The latest acquisition brings the total to 5. With the latest being the 3rd unit in one room.
Somewhere in a past shuffle/outage...I had lost a UPS (CPS700AVR), and lost a computer (box). I had rebuilt box, and as interim....put it on the PowerSource 400 that was backing up 'lhaven'. I also put the 8-port [end] switch and my wireless access point onto this PowerSource 400.
This cuts into the available runtime, and its important to me that 'lhaven' never go down. Though its also important from the operation of my home network that 'box' never goes down. And, of course, the switch...and maybe the wireless access point. Though other parts of my home network are on different PowerSource 400's. The stack of equipment at the DSL point is on one, and the stack of equipment at the Cablemodem point on another (though it also includes extra things like 2 TiVo HD's and Expanders and other HT equipment)
So, I have moved 'box' and the network equipment here to the new PowerSource 400....leaving 'lhaven' on its own.
Now the question is whether or not there'll be another 1 in the future....for 'orac'.
Pages: 1· 2
That brings the number of units in my condo to 3.
I go this one to replace the UPS (a CyberPowerSystems 1500AVR-HO) that was backing up 'lhaven' and the 8 port switch.
After getting it set up, I moved my wireless access point (Belkin F5D7130) over to this. It had gotten left behind when I moved my DSL modem and router. So it was in a place that didn't really make sense anymore. Though originally it wasn't my wireless access point, it was one of a pair for NDS bridging. But, now that I strung a cable to the remote point...I did it to solve the apparent heavy shielding of the walls in the condo.
If I do a WiFi scan around this computer, I can only hear like 4 other APs. Move to the other end of the condo...and there are dozens of APs.
The UPS plan calls for at least one more UPS....still leaning towards another SmartUPS for that one...though who knows, might go with another PowerSource 400....
Today's UPS delivery showed up...and among the items was a Xantrex PowerSource 400.
I acquired this to run the items in my 'network' closet'.
The items in there are my DSL modem, Linksys WRT54GS, Sipura SPA-3000 and the base for my Uniden cordless phone.
My Kill-A-Watt meter had reported the load at 11W, but it doesn't even register on the load meter on the Xantrex PowerSource 400. Wonder just how much life I'll get off of this?
The manual says 8W load will give 55h of run time, while a 25W load will give 15h of run time. Nothing in between...so hard to say how long it'll last really...but it'll be over a day, eh?
I wonder if I'll invest in additional units, to cover my online activities during an extended outage.
Latest Poopli Updaters -- http://lkc.me/poop
|<< <||> >>|
«sans digital» «watch instantly» lhaven zen orac prescription twitter dsl ubuntu ebay mdadm «amazon prime» 10.04lts box «air purifier» dvd eyeglasses progressive freebsd b2evolution «instant streaming» usb raid1 cox «tivo hd» «windows xp» «doctor who» replaytv ups «chicago tardis» «hd movie» backuppc «tivo premiere» boinc virtualbox cfengine3 raid tardis tivo woot amazon.com netflix appletv tv cpap «windows 7» upgrade dhcp linux «powersource 400»